PHOENIX CONTACT SACC-DSI-FS-5CON-L180/SCO SH SACC-DSI-FS-5CON-L180/SCO SH 1553019 PHOENIX CONTACT Panel feed-through View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SACC-DSI-FS-5CON-L180/SCO SH 1553019 PHOENIX CONTACT Panel feed-through

SACC-DSI-FS-5CON-L180/SCO SH

1553019

PHOENIX CONTACT

20 Pcs.

Panel feed-through Built-in mounting female for sensors/actuators, 5-pole, SPEEDCON M12, shielded, A-coded, rear wall mount/screw mount, with Pg9 thread, with straight weld connection Device connector rear mounting, 5-position, Socket, straight, M12-SPEEDCON, coding: A, Rear mounting, Pg9, Solder pins, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1237424

Connectors > Circular connector, mounting (PCB)
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

This Phoenix Contact SACC-DSI-FS-5CON-L180/SCO SH 1553019 panel feed-through features a secure shielded construction to protect sensitive automation signals from environmental noise. Panel connectors provide a reliable bridge between internal device circuitry and external sensor cabling in modern manufacturing plants.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Order information:: Lock nut is included in the scope of delivery
  • Mounting type: Rear mounting Pg9 With flat nut
  • Assembly note: With flat nut
  • Product type: Circular connectors (device side)
  • Number of positions: 5
  • Shielded: yes
  • Coding: A
  • Thread type: M12
  • Data management status Article revision: 12
  • Insulation characteristics Overvoltage category: II
  • Degree of pollution: 3
  • Length of the solder pin: 6 mm
  • Flammability rating according to UL 94: V0
  • Seal material: NBR
  • Contact material: CuZn
  • Contact surface material: Au

More info

▲
Technical data

Notes
Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information:Lock nut is included in the scope of delivery

Mounting
Mounting typeRear mounting Pg9 With flat nut
Assembly noteWith flat nut

Product properties
Product typeCircular connectors (device side)
Number of positions5
Shieldedyes
CodingA
Thread typeM12
Data management status
Article revision12
Insulation characteristics
Overvoltage categoryII
Degree of pollution3

Dimensions
Length of the solder pin6 mm
6 mm

Material specifications
Flammability rating according to UL 94V0
Seal materialNBR
Contact materialCuZn
Contact surface materialAu
Contact carrier materialPA 6.6
Material for screw connectionZinc die-cast, nickel-plated

Electrical properties
Rated surge voltage1.5 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN60 V
Nominal current IN4 A

Connection data
Conductor connection
Connection methodSolder pins
Contact connection typeSocket
Tightening torque2 Nm ... 3 Nm (Installation-side)

Mechanical properties
Mechanical data
Insertion/withdrawal cycles> 100

Connector
Connection 1
Head designSocket
Head cable outletstraight
Head thread typeM12
Head locking typeSPEEDCON
CodingA

Cable/line
Ambient temperature (operation)-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (Cable, flexible installation)

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67 (When plugged in)
IP65 (When plugged in)
IP65/IP67
Ambient temperature (operation)-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
-25 °C ... 85 °C (Cable, flexible installation)
-40 °C ... 85 °C (cable, fixed installation)

Standards and regulations
M12
Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.