PHOENIX CONTACT SACC-CI-M12FSD-4CON-L180-THR SACC-CI-M12FSD-4CON-L180-THR 1551451 PHOENIX CONTACT Bus system flat-type plug View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SACC-CI-M12FSD-4CON-L180-THR 1551451 PHOENIX CONTACT Bus system flat-type plug

SACC-CI-M12FSD-4CON-L180-THR

1551451

PHOENIX CONTACT

60 Pcs.

Bus system flat-type plug Plug-in Mounting Connector, Ethernet / PROFINET CAT5 (100 MBit/s), 4-Pole, Female Connection, Straight, M12, Coding: D , Printed Circuit Board Mounting, THR Solder Connection, Alternative product according to RoHS II without exception 6c (Pb< 0.1%) Item code: 1237392 Contact carrier, Ethernet/PROFINET CAT5 (100 Mbps), 4-position, Socket, straight, M12, coding: D, PCB mounting, THR solder connection, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1237392

Connectors > Contact insert for circular connectors
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

This Phoenix Contact SACC-CI-M12FSD-4CON-L180-THR 1551451 bus system flat-type plug acts as a specialized terminal insert for high-speed industrial network cabling. Network plugs of this type maintain signal integrity across Ethernet and fieldbus communication loops.

Pricing, availability, and lead time are confirmed per enquiry through an RFQ.

  • Product type: Contact insert
  • Application: Data
  • Sensor type: Ethernet/PROFINET
  • Number of positions: 4
  • Seal present: yes
  • Shielded: yes
  • Coding: D
  • Thread type: M12
  • Data management status Article revision: 06
  • Insulation characteristics Overvoltage category: II
  • Degree of pollution: 3
  • Rated surge voltage: 2.5 kV
  • Contact resistance: ≤ 3 mΩ
  • Insulation resistance: ≥ 100 MΩ
  • Nominal voltage U N: 250 V
  • Nominal current I N: 4 A

More info

▲
Technical data

Notes
Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.

Product properties
Product typeContact insert
ApplicationData
Signal
Sensor typeEthernet/PROFINET
Number of positions4
Seal presentyes
Shieldedyes
CodingD
Thread typeM12
Data management status
Article revision06
Insulation characteristics
Overvoltage categoryII
Degree of pollution3

Electrical properties
Rated surge voltage2.5 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN250 V
Nominal current IN4 A
Transmission characteristics (category)CAT5 (IEC 11801:2002)

Connection data
Connection methodTHR solder connection

Interfaces
Signal type/categoryEthernet/PROFINET CAT5, 100 Mbps

Material specifications
Flammability rating according to UL 94V0
Seal materialFKM
Contact materialCuZn
Contact surface materialAu
Contact carrier materialPA 6T/66

Connector
Connection 1
Head designSocket
Head cable outletstraight
Head thread typeM12
CodingD

Cable/line
Signal type/categoryEthernet/PROFINET CAT5, 100 Mbps
Ambient temperature (operation)-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (Cable, flexible installation)

Mechanical properties
Mechanical data
Insertion/withdrawal cycles> 100

Environmental and real-life conditions
Ambient conditions
Degree of protection (when plugged in)IP67 (correctly plugged in and locked)
Degree of protectionIP67 (correctly plugged in and locked)
IP67, when plugged in
Ambient temperature (operation)-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
-25 °C ... 85 °C (Cable, flexible installation)
-40 °C ... 85 °C (cable, fixed installation)

Standards and regulations
M12
Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

Mounting
Mounting typePCB mounting

Packaging specifications
Type of packagingTray

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.