View larger
HC-B 16-A-UT-PER-F 1648090 PHOENIX CONTACT Terminal adapter
HC-B 16-A-UT-PER-F
1648090
PHOENIX CONTACT
5 Pcs.
Connectors > Contact insert for rectangular connectors
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact HC-B 16-A-UT-PER-F terminal adapter acts as an internal interface module, bridging field wiring to larger modular connector assemblies within industrial control cabinets. Terminal adapters facilitate clean conductor distribution and secure connection points in multi-pole plug systems used throughout factory automation networks. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Contact type (EF001587): Bus
- Number of poles (EF001391): 16
- Ambient temperature (EF002386): 125 °C
- Operating temperature (EF002393): -40 °C
- Rated voltage (EF000228): 500 V
- Over voltage category (EF006785): III
- With wire protection (EF000550): No
- Connectable conductor cross section multi-wired (EF007343): 0.5 mm²
- With protective conductor (EF007468): Yes
- Width (EF000008): 34 mm
- Height (EF000040): 74.2 mm
- Depth (EF000049): 84.5 mm
More info
▲Key Commercial Data
| Orderkey | 1648090 |
|---|---|
| Packing unit | 5 pc |
| Catalog page | Page 545 (C-2-2017) |
| GTIN | 4017918969738 |
| Weight per Piece (excluding packing) | 30.000 g |
| Custom tariff number | 85366990 |
| Country of origin | CN (China) |
Electrical characteristics
| Number of positions | 16 |
|---|---|
| Connection in acc. with standard | IEC / EN |
| Rated voltage (III/3) | 500 V |
| Rated surge voltage | 6 kV |
| Rated current | 16 A |
Mechanical characteristics
| Type | B16 |
|---|---|
| Screw thread | M3 |
| Connection method | Screw connection |
| Tightening torque | 0.5 Nm ... 0.8 Nm |
| Stripping length of the individual wire | 12 mm |
| Conductor cross section | 0.5 mm² ... 2.5 mm² |
| Connection cross section AWG | 20 ... 14 |
General
| Note | For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B16 type |
|---|---|
| Connectors may be operated only when there is no load/voltage. | |
| Contact material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PA |
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22 and R23 acc. to DIN EN 45545-2 (Risk level HL1 - HL2) |
| PA: Fire protection in rail vehicles - requirement set R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) | |
| Degree of pollution | 3 |
| Overvoltage category | III |
| Flammability rating according to UL 94 | V0 |
| Connection in acc. with standard | IEC / EN |
| Assembly instructions | To ensure correct use, installation in housing with IP54 protection or better is required |
| Installation instructions | Connectors may only be actuated when there is no load/voltage. |
Standards and Regulations
| Connection in acc. with standard | CSA |
|---|---|
| Constructional and testing regulations | DIN EN 61984 |
| DIN EN 60664 | |
| IEC 60352 | |
| Flammability rating according to UL 94 | V0 |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |