View larger
SMKDS 3/ 6 BK H1L P35 1031395 PHOENIX CONTACT Terminal for printed circuit board, pitch: 5 mm, number of pol..
SMKDS 3/ 6 BK H1L P35
1031395
PHOENIX CONTACT
50 Pcs.
Connectors > Printed circuit board terminal
PCB Connectors (PCC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact SMKDS 3/ 6 BK H1L P35 terminal for printed circuit board applications offers angled screw connections to optimize wire access in restricted control enclosures. Such angled terminal blocks simplify multi-conductor installations in complex industrial automation hardware. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product Type: PCB Terminal Block
- Product family: SMKDS 3
- Product Line: COMBICON Terminals M
- Number of poles: 6
- Grid dimension: 5 mm
- Number of rows: 1
- Pin layout: Linear Pinning
- Number of solder pins per potential: 1
- Data maintenance status Article revision: 00
- Nominal current I N: 24 A
- Rated voltage U N: 400 V
- Rated voltage (III/3): 250 V
- Rated Surge Voltage (III/3): 4 kV
- Rated voltage (III/2): 400 V
- Rated Surge Voltage (III/2): 4 kV
- Rated voltage (II/2): 630 V
More info
▲| Product Type | PCB Terminal Block |
| Product family | SMKDS 3 |
| Product Line | COMBICON Terminals M |
| Number of poles | 6 |
| Grid dimension | 5 mm |
| Number of rows | 1 |
| Pin layout | Linear Pinning |
| Number of solder pins per potential | 1 |
| Data maintenance status | |
| Article revision | 00 |
| Nominal current IN | 24 A |
| Rated voltage UN | 400 V |
| Rated voltage (III/3) | 250 V |
| Rated Surge Voltage (III/3) | 4 kV |
| Rated voltage (III/2) | 400 V |
| Rated Surge Voltage (III/2) | 4 kV |
| Rated voltage (II/2) | 630 V |
| Rated Surge Voltage (II/2) | 4 kV |
| Connection technology | |
| Design | PCB terminal block can be stacked |
| Nominal cross-section | 2.5 mm² |
| Conductor connection | |
| Connection type | Screw connection with pull sleeve |
| Conductor cross-section rigid | 0.2 mm² ... 4 mm² |
| Flexible conductor cross-section | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section AWG | 24 ... 12 |
| Flexible conductor cross-section with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Flexible conductor cross-section with ferrule with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| 2 conductors of the same cross-section rigid | 0.2 mm² ... 1.5 mm² |
| 2 conductors of the same cross-section flexible | 0.2 mm² ... 1.5 mm² |
| 2 conductors of the same cross-section flexible with ferrule without plastic sleeve | 0.25 mm² ... 0.75 mm² |
| 2 conductors of the same cross-section flexible with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1.5 mm² |
| Stripping length | 8 mm |
| Drive Form Screw Head | Philipps-Recess with longitudinal slot (H1L) |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Mounting type | Wave Soldering |
| Pin layout | Linear Pinning |
| Material information - Contact | |
| Note | WEEE/RoHS compliant, whisker-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Material Contact | Cu alloy |
| Surface finish | hot-dip tin-plated |
| Metal surface clamping point (top layer) | Tin (4 - 8 μm Sn) |
| Metal Surface Soldering Area (Top Layer) | Tin (4 - 8 μm Sn) |
| Material specifications - Housing | |
| Color (Housing) | black (9005) |
| Insulating material | PA |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flammability class according to UL 94 | V0 |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature of the ball pressure test according to EN 60695-10-2 | 125 °C |
| Note on use | For a safe conductor connection, a defined tightening torque must always be maintained. Especially with two- and three-pin PCB terminals, the single solder pin per contact point cannot intercept this. Therefore, the terminals must be supported at the conductor connection (fixed by hand, supported on the housing). |
| Dimensional drawing | |
| Grid dimension | 5 mm |
| Width [w] | 30 mm |
| Height [h] | 21.37 mm |
| Length [l] | 15.68 mm |
| Overall height | 17.87 mm |
| Solder pin length [P] | 3.5 mm |
| Pin Dimensions | 0.9 x 0.9 mm |
| PCB Design | |
| Drill Hole Diameter | 1.3 mm |
| Clearance and creepage distances | |
| Test Specification | DIN EN 60664-1 (VDE 0110-1):2008-01 |
| Insulating material group | I |
| Tracking resistance (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Rated insulation voltage (III/3) | 250 V |
| Rated Surge Voltage (III/3) | 4 kV |
| Minimum air distance value - inhomogeneous field (III/3) | 3 mm |
| Minimum value of the creepage distance (III/3) | 3.2 mm |
| Rated insulation voltage (III/2) | 400 V |
| Rated Surge Voltage (III/2) | 4 kV |
| Minimum value of the air distance - inhomogeneous field (III/2) | 3 mm |
| Minimum value of the creepage distance (III/2) | 3 mm |
| Rated insulation voltage (II/2) | 630 V |
| Rated Surge Voltage (II/2) | 4 kV |
| Minimum value of the clearance - inhomogeneous field (II/2) | 3 mm |
| Minimum value of the creepage distance (II/2) | 3.2 mm |
| Environmental conditions | |
| Ambient temperature (operating) | -40 °C ... 100 °C (depending on the current carrying capacity/derating curve) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Ambient temperature (mounting) | -5 °C ... 100 °C |
| Packaging type | packed in carton |