View larger
SACB-8/16-L-C SCO OTB 1437232 PHOENIX CONTACT Sensor/actuator box
SACB-8/16-L-C SCO OTB
1437232
PHOENIX CONTACT
1 Pcs.
Cables > Passive sensor-actuator interface (without cable)
QUICKON Installation System (QPD)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Sensor/actuator box SACB-8/16-L-C SCO OTB manufactured by Phoenix Contact provides a structured interface for connecting multiple binary sensors and actuators to a master control unit. By consolidating multi-conductor cabling into a single pre-wired hub, these devices reduce installation labor and cabinet footprint in factory automation setups.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Connectable conductor cross section: 0.14 mm²
- Number of sensor-/actuator-slots: 8
- Number of channels per connector slot: 2
- Type of branches for sensor-/actuator cables: M12
- Number of poles sensor/actuator slots: 5
- Operating voltage: 24 V
- Max. current carrying capacity per I/O signal: 8 A
- Max. total current: 8 A
- With LED indication: Yes
- With potential separation: No
- Connection for NPN-sensors: No
- Operating temperature: -30 °C
- Degree of protection (IP): IP54
- Width: 58 mm
- Height: 28 mm
More info
▲Key Commercial Data
| Orderkey | 1437232 |
|---|---|
| Packing unit | 1 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 271 (C-2-2017) |
| GTIN | 4046356455626 |
| Weight per Piece (excluding packing) | 362.300 g |
| Custom tariff number | 85366990 |
| Country of origin | PL (Poland) |
General
| Rated voltage | 24 V DC |
|---|---|
| Max. operating voltage Umax | 30 V DC |
| Current carrying capacity per I/O signal | 2 A |
| Current carrying capacity per slot | 4 A |
| Total rated current | 8 A |
| Number of positions | 5 |
| Number of slots | 8 |
| Sensor/actuator connection system | M12-SPEEDCON-socket |
Ambient conditions
| Degree of protection | IP54 (with sealed mounting holes) |
|---|---|
| Ambient temperature (operation) | -30 °C ... 80 °C |
| Ambient temperature (storage/transport) | -30 °C ... 90 °C |
Master cable data/connection data
| Connection method | Rear plug-in spring connection |
|---|---|
| Conductor cross section min. (signal) | 0.14 mm² |
| Conductor cross section max. (signal) | 1.5 mm² |
| Conductor cross section AWG min. (signal) | 26 |
| Conductor cross section AWG max. (signal) | 16 |
| Stripping length (signal) | 9 mm |
| Conductor cross section min. (energy) | 0.14 mm² |
| Conductor cross section max. (energy) | 1.5 mm² |
| Conductor cross section AWG min. (energy) | 26 |
| Conductor cross section AWG max. (energy) | 16 |
| Tightening torque slot sensor/actuator cable | 0.4 Nm |
| Tightening torque of mounting screw for fixing the housing | 0.5 Nm |
Insulation material
| Housing material | PBT |
|---|---|
| Material of the moulding mass | PUR |
| Contact material | Cu alloy |
| Contact surface material | gold-plated |
| Contact carrier material | PA |
| Material of contact, master cable side | CU alloy |
| Material of contact surface, master cable side | tin-plated |
| Material of the contact carrier on the master cable side | PA |
| Material of threaded sleeve | Zinc die-cast |
| Material of threaded sleeve surface | Nickel-plated |
| O-ring material | NBR |
| Sealing material | CR (flat gasket on the back) |
Pin assignment
| Slot/position = Wire color or connection | 1 / 4 (A) = 1 / 4 |
|---|---|
| 1 / 2 (B) = 1 / 2 | |
| 2 / 4 (A) = 2 / 4 | |
| 2 / 2 (B) = 2 / 2 | |
| 3 / 4 (A) = 3 / 4 | |
| 3 / 2 (B) = 3 / 2 | |
| 4 / 4 (A) = 4 / 4 | |
| 4 / 2 (B) = 4 / 2 | |
| 5 / 4 (A) = 5 / 4 | |
| 5 / 2 (B) = 5 / 2 | |
| 6 / 4 (A) = 6 / 4 | |
| 6 / 2 (B) = 6 / 2 | |
| 7 / 4 (A) = 7 / 4 | |
| 7 / 2 (B) = 7 / 2 | |
| 8 / 4 (A) = 8 / 4 | |
| 8 / 2 (B) = 8 / 2 | |
| 1-8 / 1 (+ 24 V) = UN | |
| 1-8 / 3 (0 V) = 0 V | |
| 1-8 / 5 (PE) = PE |
Environmental Product Compliance
| China RoHS | Environmentally Friendly Use Period = 50 |
|---|---|
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |