PHOENIX CONTACT PSR-SCP-24UC/URM/5X1/1X2 PSR-SCP- 24UC/URM/5X1/1X2 2981952 PHOENIX CONTACT Coupling relay View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PSR-SCP- 24UC/URM/5X1/1X2 2981952 PHOENIX CONTACT Coupling relay

PSR-SCP-24UC/URM/5X1/1X2

2981952

PHOENIX CONTACT

1 Pcs.

Coupling relay Secure coupling relay with forced-conduction contacts, 5 normally open contacts, 1 normally closed contacts, plug-in screw terminal, width: 22.5 mm Safe coupling relay with force-guided contacts, 5 N/O contacts, 1 N/C contact, plug-in screw terminal block, width: 22.5 mm

Automation > Device for monitoring of safety-related circuits
Safety

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Industrial coupling relays provide secure signal amplification and electrical separation between control systems and output actuators in manufacturing plants. This Phoenix Contact PSR-SCP-24UC/URM/5X1/1X2 component uses force-guided contacts to guarantee safe switching performance and reliable diagnostic feedback across process control loops.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Note on application Note on application: Only for industrial use
  • Product type: Coupling relay
  • Product family: PSRclassic
  • Application: Safe switch off
  • Mechanical service life: 10x 10 6 cycles
  • Relay type: Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
  • Data management status Article revision: 06
  • Times Restart time: < 1 s (Boot time)
  • Nominal operating mode: 100% operating factor
  • General Rated control circuit supply voltage U S: 24 V AC/DC -15 % / +10 %
  • Power consumption at U S: typ. 1.2 W
  • Rated control supply current I S: typ. 47 mA
  • Input voltage range: 20.4 V AC/DC ... 26.4 V AC/DC
  • Inrush current: typ. 350 mA DC (Δt s)
  • Typ. starting time with U s: typ. 20 ms (when controlled via A1)
  • Typical release time: typ. 20 ms (when controlled via A1)

More info

▲
Technical data

Notes
Note on application
Note on applicationOnly for industrial use

Product properties
Product typeCoupling relay
Product familyPSRclassic
ApplicationSafe switch off
High demand
Low demand
Mechanical service life10x 106cycles
Relay typeElectromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Data management status
Article revision06
Times
Restart time< 1 s (Boot time)

Electrical properties
Maximum power dissipation for nominal condition8.56 W (at UB= 26.4 V DC, US= 24 V, IS= 47 mA, n = 1, IL² = 72 A², Rcontact= 0.1 )
Nominal operating mode100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage250 V
250 V
Rated surge voltage/insulation4 kV / basic isolation (safe isolation, reinforced isolation and 6 kV between A1/A2, 53/54, 71/72 and 13/14, 23/24, 33/34, 43/44.)

Input data
General
Rated control circuit supply voltage US24 V AC/DC -15 % / +10 %
Power consumption at UStyp. 1.2 W
Rated control supply current IStyp. 47 mA
Input voltage range20.4 V AC/DC ... 26.4 V AC/DC
Inrush currenttyp. 350 mA DC (Δt s)
typ. 350 mA AC (Δt = 2 ms at Us)
Typ. starting time with Ustyp. 20 ms (when controlled via A1)
Typical release timetyp. 20 ms (when controlled via A1)
Recovery time< 500 ms
Maximum switching frequency0.5 Hz
Protective circuitSurge protection; Varistor
Operating voltage display1 x green LED

Output data
Contact switching type5 enabling current paths
1 confirmation current path
Contact materialAgSnO2
Maximum switching voltage230 V AC/DC (Observe the load curve)
Minimum switching voltage5 V AC/DC
Limiting continuous current6 A (N/O contact)
6 A (N/C contact)
Maximum inrush current6 A
Inrush current, minimum10 mA
Sq. Total current72 A2
Interrupting rating (ohmic load) max.144 W (N/O contact, 24 V DC, τ = 0 ms)
288 W (N/O contact, 48 V DC, τ = 0 ms)
240 W (N/O contact, 60 V DC, τ = 0 ms)
110 W (N/O contact, 110 V DC, τ = 0 ms)
88 W (N/O contact, 220 V DC, τ = 0 ms)
1380 VA (N/O contact, 230 V AC, τ = 0 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 24 V DC, τ = 40 ms)
42 W (N/O contact, 48 V DC, τ = 40 ms)
42 W (N/O contact, 60 V DC, τ = 40 ms)
42 W (N/O contact, 110 V DC, τ = 40 ms)
42 W (N/O contact, 220 V DC, τ = 40 ms)
Switching capacitymin. 50 mW
Switching capacity in accordance with IEC 60947-5-13 A (24 V (DC13))
3 A (230 V (AC 15))
Switching capacity (360/h cycles)4 A (24 V (DC13))
4 A (230 V (AC15))
Output fuse10 A gL/gG (N/O contact)
4 A gL/gG (N/O contact, for low-demand applications)
6 A gL/gG (N/C contact)

Connection data
Connection technology
pluggableyes
Conductor connection
Connection methodScrew connection
Conductor cross section rigid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross-section AWG24 ... 12
Stripping length7 mm
Screw threadM3
Tightening torque0.6 Nm

Dimensions
Width22.5 mm
Height114.5 mm
Depth99 mm

Material specifications
Color (Housing)yellow (RAL 1018)
Housing materialPolyamide

Characteristics
Safety data
Stop category0
Safety data: EN ISO 13849
Category1
Performance level (PL)c
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)1
Safety data: IEC 61508 - Low demand
Safety Integrity Level (SIL)1
Safety data
Safety Integrity Level (SIL)1

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Min. degree of protection of inst. locationIP54
Ambient temperature (operation)-20 °C ... 55 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Maximum altitudemax. 2000 m (Above sea level)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Shock15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
Vibration (operation)10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)

Approvals
CE
CertificateCE-compliant

Standards and regulations
Air clearances and creepage distances between the power circuits
Standards/regulationsDIN EN 50178

Mounting
Mounting typeDIN rail mounting
Mounting positionvertical or horizontal

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.