PHOENIX CONTACT SACC-E-MS-5CON-M16/0,7 SCO SACC-E-MS-5CON-M16/0,7 SCO 1458826 PHOENIX CONTACT Flush-type connector View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SACC-E-MS-5CON-M16/0,7 SCO 1458826 PHOENIX CONTACT Flush-type connector

SACC-E-MS-5CON-M16/0,7 SCO

1458826

PHOENIX CONTACT

100 Pcs.

Flush-type connector Conect. plug. to be apar. front wall, Universal, 5-pole, Male connector, straight, M12-SPEEDCON, coding: A, to free cable end, Front mounting, M16 x 1.5, Single stranded wires, cable length: 0.7 m, 0.34 mm², TPE braided wire

Cables > Circular connector, mounting (with cable)
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

The Phoenix Contact SACC-E-MS-5CON-M16/0,7 SCO Flush-type connector enables streamlined pin connections on equipment panels and control units. Flush connectors bridge internal wiring layouts and external sensor networks efficiently.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Cable length (EF000536): 0.7 mm
  • Mounting method (EF000003): Front mounting
  • Ambient temperature (EF002386): 85 °C
  • Operating temperature (EF002393): -25 °C
  • Rated voltage (EF000228): 60 V
  • With shield connection (EF002535): No
  • Screw-in thread (EF012303): M12
  • Core cross section (EF000018): 0.34 mm²
  • Min. number of insertion cycles (EF012212): 100
  • Degree of protection (IP), mounted (EF007466): IP67

More info

▲

Key Commercial Data

Orderkey1458826
Packing unit1 pc
Minimum order quantity100 pc
NoteMade to Order (non-returnable)
GTIN4046356650793
Weight per Piece (excluding packing)25.220 g
Custom tariff number85366990
Country of originDE (Germany)

Dimensions

Length of cable0.7 m

Ambient conditions

Degree of protectionIP67

General

NoteThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Rated current at 40°C4 A
Rated voltage60 V
Rated surge voltage1.5 kV
Number of positions5
CodingA - standard
Standards/regulationsM12 connector IEC 61076-2-101
Signal type/categoryUniversal
Status displayNo
Overvoltage categoryII
Degree of pollution3
Connection methodIndividual wires
Insertion/withdrawal cycles> 100
Torque3 Nm ... 4 Nm (Installation-side)
Mounting typeFront mounting M16 x 1.5

Material

Flammability rating according to UL 94V0
Contact materialCuZn
Contact surface materialNi/Au
Contact carrier materialPA 6.6
Material, knurlsZinc die-cast, nickel-plated
Sealing materialFKM

Cable

Cable typeTPE litz wire
Conductor cross section0.34 mm²
AWG signal line22
Conductor structure signal line7x 0.25 mm
Core diameter including insulation1.2 mm ±0.07 mm
Thickness, insulation0.21 mm
Wire colorsBlack, brown,blue, white, gray
Material conductor insulationTPE
Conductor materialTin-plated Cu litz wires
Standards/specificationsM12 connector IEC 61076-2-101
Insulation resistance≥ 20 MΩ*km
Conductor resistance≤ 57.6 mΩ/m
Nominal voltage, cable300 V
Test voltage, cable2000 V AC

Standards and Regulations

Standard designationM12 connector
Standards/regulationsIEC 61076-2-101
Flammability rating according to UL 94V0

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications


Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.