View larger
SACC-DSI-MSD-4CON-L180/SH TQX 1239816 PHOENIX CONTACT Conect. plug. to be apar. poster wall, CAT5 Ethernet (..
SACC-DSI-MSD-4CON-L180/SH TQX
1239816
PHOENIX CONTACT
20 Pcs.
Connectors > Circular connector, mounting (PCB)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact SACC-DSI-MSD-4CON-L180/SH TQX 1239816 operates as a specialized Ethernet connector designed for data-intensive industrial applications. Panel receptacles of this type enable high-speed network communication links to pass securely through enclosure walls. Exact pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: Lock nut is included in the scope of delivery
- Mounting type: Rear mounting M16 x 1.5 With flat nut
- Assembly instructions: With flat nut
- Connection method: Wave soldering
- Product type: Circular connectors (device side)
- Sensor type: Ethernet
- Number of positions: 4
- Application: Data
- Shielded: yes
- Coding: D
- Thread type: M12
- Insulation characteristics Overvoltage category: II
- Degree of pollution: 3
- Length of the solder pin: 6 mm
- Flammability rating according to UL 94: V0
- Seal material: NBR
More info
▲| General | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| General | Lock nut is included in the scope of delivery |
| Mounting type | Rear mounting M16 x 1.5 With flat nut |
| Assembly instructions | With flat nut |
| Connection method | Wave soldering |
| Product type | Circular connectors (device side) |
| Sensor type | Ethernet |
| Number of positions | 4 |
| Application | Data |
| Shielded | yes |
| Coding | D |
| Thread type | M12 |
| Insulation characteristics | |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Length of the solder pin | 6 mm |
| 6 mm |
| Flammability rating according to UL 94 | V0 |
| Seal material | NBR |
| Contact material | CuZn |
| Contact surface material | Ni/Au |
| Contact carrier material | PA 6.6 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Rated surge voltage | 2.5 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 48 V AC |
| 60 V DC | |
| Nominal current IN | 4 A |
| Transmission characteristics (category) | CAT5 (IEC 11801:2002) |
| Conductor connection | |
| Connection method | Wave soldering |
| Contact connection type | Pin |
| Tightening torque | 3 Nm |
| 4 Nm | |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 100 |
| Connection 1 | |
| Head design | Pin |
| Head cable outlet | straight |
| Head thread type | M12 |
| Head locking type | SPEEDCON |
| Coding | D |
| Signal type/category | Ethernet CAT5, 100 Mbps |
| Wire diameter incl. insulation | 1 mm |
| Ambient conditions | |
| Degree of protection | IP67 (When plugged in) |
| IP65 (When plugged in) | |
| IP65/IP67 | |
| Ambient temperature (operation) | -40 °C ... 70 °C (Plug / socket) |
| -50 °C ... 70 °C (Cable, flexible installation) | |
| -20 °C ... 60 °C (cable, fixed installation) | |
| M12 | |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |