View larger
SACC-DSI-M12MSL-4CON-M16XL/1,5X 1238565 PHOENIX CONTACT Conect. plug. to be apar. wall poster., Power, 4-pol..
SACC-DSI-M12MSL-4CON-M16XL/1,5X
1238565
PHOENIX CONTACT
25 Pcs.
Cables > Circular connector, mounting (with cable)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Constructed as an SACC-DSI-M12MSL-4CON-M16XL/1,5X Phoenix Contact SACC-DSI-M12MSL-4CON-M16XL/1,5X 1238565 PHOENIX CONTACT Conect. plug. to be apar. wall poster., Power, 4-pol.., this circular connector (device side) component integrates into industrial machinery to establish secure internal links for power transmission and signals. Panel-mounted connectors of this design simplify wiring tasks by providing a reliable interface between modular subassemblies.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: Lock nut is included in the scope of delivery
- Mounting type: Rear mounting M16 x 1.5 Tightening limitation
- Assembly instructions: Tightening limitation
- Connection method: Individual wires
- Product type: Circular connectors (device side)
- Sensor type: Power
- Number of positions: 4
- No. of cable outlets: 1
- Shielded: no
- Coding: L
- Thread type: M12
- Insulation characteristics Overvoltage category: III
- Degree of pollution: 3
- Flammability rating according to UL 94: V0
- Seal material: FKM
- Contact material: CuZn
More info
▲| General | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| General | Lock nut is included in the scope of delivery |
| Mounting type | Rear mounting M16 x 1.5 Tightening limitation |
| Assembly instructions | Tightening limitation |
| Connection method | Individual wires |
| Product type | Circular connectors (device side) |
| Sensor type | Power |
| Number of positions | 4 |
| No. of cable outlets | 1 |
| Shielded | no |
| Coding | L |
| Thread type | M12 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Flammability rating according to UL 94 | V0 |
| Seal material | FKM |
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PA |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Conductor material | Tin-plated Cu litz wires |
| Rated surge voltage | 1.5 kV |
| 1.5 kV AC/DC | |
| Nominal voltage UN | 63 V |
| Nominal current IN | 16 A |
| Test voltage | 1.5 kV |
| Conductor connection | |
| Connection method | Individual wires |
| Contact connection type | Pin |
| Conductor cross section | 2.5 mm² |
| Connection 1 | |
| Head design | Pin |
| Head cable outlet | straight |
| Head thread type | M12 |
| Coding | L |
| Connection 2 | |
| Head design | free cable end |
| Cable length | 1.5 m |
| Cable type | PEX litz wire |
| Signal type/category | Power |
| Single wire, color | brown 1, white 2, blue 3, black 4 |
| Cable cross section | 2.5 mm² |
| Conductor material | Tin-plated Cu litz wires |
| AWG signal line | 14 |
| Material wire insulation | PE-X |
| Halogen-free | according to IEC 60754-1 |
| Flame resistance | in acc. with UL FT-2 |
| Ambient temperature (operation) | -40 °C ... 85 °C (without mechanical actuation) |
| -40 °C ... 85 °C (without mechanical actuation) | |
| -25 °C ... 105 °C (Cable, flexible installation) |
| Ambient conditions | |
| Degree of protection | IP67 |
| IP65/IP67 | |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| -40 °C ... 85 °C (without mechanical actuation) | |
| -25 °C ... 105 °C (Cable, flexible installation) | |
| -40 °C ... 105 °C (cable, fixed installation) | |
| Flame resistance | in acc. with UL FT-2 |
| M12 | |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-111 |
| Note | In line with |