PHOENIX CONTACT SACC-DSI-M12FS-8P-M16XL/1,5 SACC-DSI-M12FS-8P-M16XL/1,5 1571162 PHOENIX CONTACT Conect. plug. to be apar. wall poster., Universal, 8-pol.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SACC-DSI-M12FS-8P-M16XL/1,5 1571162 PHOENIX CONTACT Conect. plug. to be apar. wall poster., Universal, 8-pol..

SACC-DSI-M12FS-8P-M16XL/1,5

1571162

PHOENIX CONTACT

1000 Pcs.

Conect. plug. to be apar. wall poster., Universal, 8-pole, Female connection, straight, M12-Standard, coding: A, to free cable end, Rear wall mounting, M16 x 1.5, Single stranded wires, cable length: 1.5 m, 0.25 mm², TPE braided wire Connect. plug in. to apar. wall poster. Device connector, rear mounting, Universal, 8-position, Socket, straight, M12-Standard, coding: A, on free cable end, Rear mounting, M16 x 1.5, Individual wires, cable length: 1.5 m, 0.25 mm2, TPE litz wire

Cables > Circular connector, mounting (with cable)
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

This Phoenix Contact SACC-DSI-M12FS-8P-M16XL/1,5 1571162 PCB connector provides a dependable device-side interface for multi-conductor control systems. Engineers specify circular connectors of this type to build robust signal pathways into industrial equipment enclosures.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • General: Lock nut is included in the scope of delivery:
  • General: Contact connection method: Crimp connection
  • Mounting type: Rear mounting M16 x 1.5 With flat nut, tightening limitation
  • Assembly instructions: With flat nut, tightening limitation
  • Connection method: Individual wires
  • Product type: Circular connectors (device side)
  • Sensor type: Universal
  • Number of positions: 8
  • No. of cable outlets: 1
  • Shielded: no
  • Coding: A
  • Thread type: M12
  • Insulation characteristics Overvoltage category: II
  • Degree of pollution: 3
  • Flammability rating according to UL 94: V0
  • Seal material: FKM

More info

▲
Technical data

Notes
GeneralThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
GeneralLock nut is included in the scope of delivery
GeneralContact connection method: Crimp connection

Mounting
Mounting typeRear mounting M16 x 1.5 With flat nut, tightening limitation
Assembly instructionsWith flat nut, tightening limitation
Connection methodIndividual wires

Product properties
Product typeCircular connectors (device side)
Sensor typeUniversal
Number of positions8
No. of cable outlets1
Shieldedno
CodingA
Thread typeM12
Insulation characteristics
Overvoltage categoryII
Degree of pollution3

Material specifications
Flammability rating according to UL 94V0
Seal materialFKM
Contact materialCuZn
Contact surface materialAu
Contact carrier materialPA 6.6
Material for screw connectionZinc die-cast, nickel-plated
Conductor materialTin-plated Cu litz wires

Electrical properties
Rated surge voltage0.8 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN30 V (AC)
30 V (DC)
Nominal current IN2 A
Max. conductor resistance80 mΩ/m

Connection data
Conductor connection
Connection methodIndividual wires
Contact connection typeSocket
Conductor cross section0.25 mm²
Tightening torque0.8 Nm
1.3 Nm

Mechanical properties
Mechanical data
Insertion/withdrawal cycles> 100

Connector
Connection 1
Head designSocket
Head cable outletstraight
Head thread typeM12
Head locking typeStandard
CodingA
Connection 2
Head designfree cable end

Cable/line
Cable length1.5 m
Cable typeTPE litz wire
Signal type/categoryUniversal
Wire diameter incl. insulation1.15 mm ±0.07 mm
Single wire, colorbrown, blue, white, gray, pink, red, yellow, green
Cable cross section0.25 mm²
Conductor materialTin-plated Cu litz wires
Conductor structure signal line14x 0.15 mm
AWG signal line24
Material wire insulationTPE
Thickness, insulation0.21 mm
Nominal voltage, cable300 V
Test voltage, cable2000 V AC
Cable resistance≤ 80 mΩ/m
Cable insulation resistance≥ 20 MΩ*km
Ambient temperature (operation)-40 °C ... 85 °C (cable, fixed installation)
-25 °C ... 85 °C (Cable, flexible installation)

Environmental and real-life conditions
Ambient conditions
Degree of protectionIP67
IP65/IP67
Ambient temperature (operation)-25 °C ... 85 °C (Plug / socket)
-40 °C ... 85 °C (without mechanical actuation)
-25 °C ... 85 °C (Cable, flexible installation)
-40 °C ... 85 °C (cable, fixed installation)

Standards and regulations
Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.