PHOENIX CONTACT SACC-CIP-M8FSB-5P SMD T SACC-CIP-M8FSB-5P SMD T 1412229 PHOENIX CONTACT Flush-type connector View larger
Images are for illustrative purposes only. Please refer to data sheet for details

SACC-CIP-M8FSB-5P SMD T 1412229 PHOENIX CONTACT Flush-type connector

SACC-CIP-M8FSB-5P SMD T

1412229

PHOENIX CONTACT

60 Pcs.

Flush-type connector Built-in mounting female for sensors/actuators, 5-pole, B-coded, M8, SMD Contact carrier, Universal, 5-position, Socket, straight, M8, coding: B, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1308258

Connectors > Contact insert for circular connectors
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact flush-type connector (part number SACC-CIP-M8FSB-5P SMD T) provides a standardized board-level interface for terminating data and signal lines directly onto printed circuit boards within industrial electronics. These receptacles are widely deployed in sensor networks and fieldbus architectures to maintain secure, compact device communication.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product type: Contact insert
  • Application: Data/signal
  • Sensor type: Universal
  • Number of positions: 5
  • Seal present: yes
  • Shielded: no
  • Coding: B
  • Thread type: M8
  • Data management status Article revision: 01
  • Insulation characteristics Overvoltage category: III
  • Contact resistance: ≤ 3 mΩ
  • Insulation resistance: ≤ 100 MΩ
  • Nominal voltage U N: 30 V AC
  • Nominal current I N: 3 A
  • Connection method: SMD reflow
  • Bus system: DeviceNet™

More info

▲
Technical data

Notes
Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.

Product properties
Product typeContact insert
ApplicationData/signal
Sensor typeUniversal
Number of positions5
Seal presentyes
Shieldedno
CodingB
Thread typeM8
Data management status
Article revision01
Insulation characteristics
Overvoltage categoryIII

Electrical properties
Contact resistance≤ 3 mΩ
Insulation resistance≤ 100 MΩ
Nominal voltage UN30 V AC
30 V DC
Nominal current IN3 A

Connection data
Connection methodSMD reflow

Interfaces
Bus systemDeviceNet™
Signal type/categoryUniversal

Material specifications
Flammability rating according to UL 94V0
Seal materialFKM
Contact materialCuZn
Contact surface materialAu
Contact carrier materialPA

Connector
Connection 1
Head designSocket
Head cable outletstraight
Head thread typeM8
CodingB

Cable/line
Signal type/categoryUniversal

Environmental and real-life conditions
Ambient conditions
Degree of protection (when plugged in)IP67 (correctly plugged in and locked)
Degree of protectionIP67
Ambient temperature (operation)-25 °C ... 105 °C (Plug / socket)
-40 °C ... 105 °C (without mechanical actuation)

Standards and regulations
M8
Standard designationM8 connector
Standards/specificationsIEC 61076-2-104

Mounting
Mounting typePCB mounting

Packaging specifications
Type of packagingTray

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.