View larger
SACC-BP-F-M12/M15-7-THR SCO 1414005 PHOENIX CONTACT Housing screw connection
SACC-BP-F-M12/M15-7-THR SCO
1414005
PHOENIX CONTACT
20 Pcs.
Connectors > Housing for circular connectors
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
A Phoenix Contact SACC-BP-F-M12/M15-7-THR SCO housing screw connection provides a dependable interface for board-mounted sensor signals using quick-locking SPEEDCON technology. Panel mounting bases establish sealed pathways for data transmission across industrial enclosure walls. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Order information:: Lock nut is included in the scope of delivery
- Product type: Panel mounting base
- Thread type: M12
- Data management status Article revision: 05
- Connection method: THR solder connection
- Tightening torque: 1.5 ... 2 Nm
- Material: Zinc die-cast (nickel-plated)
- Material: Brass, nickel-plated (Locking nut)
- Seal material: FKM
- Material for screw connection: Zinc die-cast, nickel-plated
- Connection 1 Head design: Socket
- Head thread type: M12
- Head locking type: SPEEDCON
- Mechanical data Insertion/withdrawal cycles: > 100
- Ambient conditions Degree of protection (when plugged in): IP67 (correctly plugged in and locked)
- Degree of protection: IP67 (correctly plugged in and locked)
More info
▲| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Order information: | Lock nut is included in the scope of delivery |
| Product type | Panel mounting base |
| Thread type | M12 |
| Data management status | |
| Article revision | 05 |
| Connection method | THR solder connection |
| Tightening torque | 1.5 ... 2 Nm |
| Material | Zinc die-cast (nickel-plated) |
| Material | Brass, nickel-plated (Locking nut) |
| Seal material | FKM |
| FKM | |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Connection 1 | |
| Head design | Socket |
| Head thread type | M12 |
| Head locking type | SPEEDCON |
| Mechanical data | |
| Insertion/withdrawal cycles | > 100 |
| Ambient conditions | |
| Degree of protection (when plugged in) | IP67 (correctly plugged in and locked) |
| Degree of protection | IP67 (correctly plugged in and locked) |
| IP67, when in locked state | |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| -40 °C ... 85 °C (without mechanical actuation) | |
| M12 | |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |
| Note | In line with |
| Mounting type | Rear mounting M15 x 1 Spacing between the top edge of the PCB and the back of the front plate: 7 mm |
| Assembly note | Spacing between the top edge of the PCB and the back of the front plate: 7 mm |