View larger
SACC-BP-F-M12/M15-6-THR WNO 1070297 PHOENIX CONTACT Housing screw connection SACC-BP-F-M12/M15-6-THR WNO 107..
SACC-BP-F-M12/M15-6-THR WNO
1070297
PHOENIX CONTACT
100 Pcs.
Connectors > Housing for circular connectors
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact housing screw connection reference SACC-BP-F-M12/M15-6-THR WNO (1070297) functions as a panel mounting base designed to bridge internal printed circuit boards with external M12 socket connections. It offers stable mechanical mounting and reliable ingress protection for electronic control equipment.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Panel mounting base
- Thread type: M12
- Data management status Article revision: 05
- Connection method: THR solder connection
- Tightening torque: 1.5 ... 2 Nm
- Material: Zinc die-cast (nickel-plated)
- Connection 1 Head design: Socket
- Head thread type: M12
- Mechanical data Insertion/withdrawal cycles: > 100
- Ambient conditions Degree of protection (when plugged in): IP67 (correctly plugged in and locked)
- Degree of protection: IP67 (correctly plugged in and locked)
- Ambient temperature (operation): -25 °C ... 85 °C (Plug / socket)
- M12 Standard designation: M12 connector
- Standards/specifications: IEC 61076-2-101
- Note: In line with
- Assembly note: Spacing between the top edge of the PCB and the back of the front plate: 6 mm
More info
▲| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Product type | Panel mounting base |
| Thread type | M12 |
| Data management status | |
| Article revision | 05 |
| Connection method | THR solder connection |
| Tightening torque | 1.5 ... 2 Nm |
| Material | Zinc die-cast (nickel-plated) |
| Connection 1 | |
| Head design | Socket |
| Head thread type | M12 |
| Mechanical data | |
| Insertion/withdrawal cycles | > 100 |
| Ambient conditions | |
| Degree of protection (when plugged in) | IP67 (correctly plugged in and locked) |
| Degree of protection | IP67 (correctly plugged in and locked) |
| IP67, when in locked state | |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| -40 °C ... 85 °C (without mechanical actuation) | |
| M12 | |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |
| Note | In line with |
| Mounting type | Rear mounting M15 x 1 Spacing between the top edge of the PCB and the back of the front plate: 6 mm |
| Assembly note | Spacing between the top edge of the PCB and the back of the front plate: 6 mm |