View larger
SACC-BP-F-M12/M15-6-THR SCO 1414020 PHOENIX CONTACT Housing screw connection
SACC-BP-F-M12/M15-6-THR SCO
1414020
PHOENIX CONTACT
20 Pcs.
Connectors > Housing for circular connectors
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact SACC-BP-F-M12/M15-6-THR SCO is a housing screw connection engineered for integrating M12 connection interfaces onto device faceplates. Panel mounting bases offer reliable mechanical support and sealing for automated sensor and data transmission lines.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Order information:: Lock nut is included in the scope of delivery
- Product type: Panel mounting base
- Application: Railway applications
- Thread type: M12
- Data management status Article revision: 05
- Connection method: THR solder connection
- Tightening torque: 1.5 ... 2 Nm
- Material: Zinc die-cast (nickel-plated)
- Material: Brass, nickel-plated (Locking nut)
- Seal material: FKM
- Material for screw connection: Zinc die-cast, nickel-plated
- Connection 1 Head design: Socket
- Head thread type: M12
- Head locking type: SPEEDCON
- Mechanical data Insertion/withdrawal cycles: > 100
- Ambient conditions Degree of protection (when plugged in): IP67 (correctly plugged in and locked)
More info
▲| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Order information: | Lock nut is included in the scope of delivery |
| Product type | Panel mounting base |
| Application | Railway applications |
| Thread type | M12 |
| Data management status | |
| Article revision | 05 |
| Connection method | THR solder connection |
| Tightening torque | 1.5 ... 2 Nm |
| Material | Zinc die-cast (nickel-plated) |
| Material | Brass, nickel-plated (Locking nut) |
| Seal material | FKM |
| FKM | |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Connection 1 | |
| Head design | Socket |
| Head thread type | M12 |
| Head locking type | SPEEDCON |
| Mechanical data | |
| Insertion/withdrawal cycles | > 100 |
| Ambient conditions | |
| Degree of protection (when plugged in) | IP67 (correctly plugged in and locked) |
| Degree of protection | IP67 (correctly plugged in and locked) |
| IP67, when in locked state | |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| -40 °C ... 85 °C (without mechanical actuation) | |
| M12 | |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |
| Note | In line with |
| Standard designation | Shock, vibration |
| Standards/specifications | EN 50155 |
| Mounting type | Rear mounting M15 x 1 Spacing between the top edge of the PCB and the back of the front plate: 6 mm |
| Assembly note | Spacing between the top edge of the PCB and the back of the front plate: 6 mm |