View larger
SACC-BP-F-M12/M15-6-SMD SCO 1414023 PHOENIX CONTACT Housing screw connection
SACC-BP-F-M12/M15-6-SMD SCO
1414023
PHOENIX CONTACT
20 Pcs.
Connectors > Housing for circular connectors
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact SACC-BP-F-M12/M15-6-SMD SCO housing screw connection provides a reliable bulkhead interface for automated sensor and control lines. Surface-mount compatible connector hardware maintains sealed, vibration-resistant connections across demanding industrial equipment panels. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Orderkey: 1414023
- Packing unit: 20 pc
- Minimum order quantity: 20 pc
- GTIN: 4055626022659
- Weight per Piece (excluding packing): 9.130 g
- Custom tariff number: 79070000
- Country of origin: DE (Germany)
- Ambient temperature (operation): -25 °C ... 85 °C (Plug / socket)
- Degree of protection: IP67 (correctly plugged in and locked)
- Standards/regulations: M12 connector IEC 61076-2-101 In line with
- Insertion/withdrawal cycles: > 100
- Torque: 1.5 Nm ... 2 Nm (Installation-side)
- Material, knurls: Zinc die-cast, nickel-plated
- Material: Zinc die-cast (nickel-plated)
- Sealing material: FKM (O-ring on housing)
- Additional material specifications: Brass, nickel-plated (Locking nut)
More info
▲Key Commercial Data
| Orderkey | 1414023 |
|---|---|
| Packing unit | 20 pc |
| Minimum order quantity | 20 pc |
| GTIN | 4055626022659 |
| Weight per Piece (excluding packing) | 9.130 g |
| Custom tariff number | 79070000 |
| Country of origin | DE (Germany) |
Ambient conditions
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
|---|---|
| -40 °C ... 85 °C (without mechanical actuation) | |
| Degree of protection | IP67 (correctly plugged in and locked) |
General
| Note | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
|---|---|
| Standards/regulations | M12 connector IEC 61076-2-101 In line with |
| Insertion/withdrawal cycles | > 100 |
| Torque | 1.5 Nm ... 2 Nm (Installation-side) |
| Mounting type | Rear mounting M15 x 1 Spacing between the top edge of the PCB and the back of the front plate: 6 mm |
Material
| Material, knurls | Zinc die-cast, nickel-plated |
|---|---|
| Material | Zinc die-cast (nickel-plated) |
| Sealing material | FKM (O-ring on housing) |
| FKM (O-ring (pin connector pattern)) | |
| Additional material specifications | Brass, nickel-plated (Locking nut) |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |