View larger
SAC-4P-M12MS/28,0-28X SH OD 1553587 PHOENIX CONTACT Sensor/actuator cable, 4-pole, M12 straight connector, t..
SAC-4P-M12MS/28,0-28X SH OD
1553587
PHOENIX CONTACT
25 Pcs.
Automation > Sensor-actuator patch cord
Industrial Field Connectivity (IFC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact SAC-4P-M12MS/28,0-28X SH OD is a sensor/actuator cable engineered to link field devices in demanding exterior operational zones. Factory-assembled cabling setups streamline industrial networking by providing reliable signal transmission between controllers, sensors, and actuators while standing up to environmental exposure. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product Type: Sensor Cable/Actuators
- Number of poles: 4
- Application: Exterior
- Number of cable outlets: 1
- Armored: Yes
- Keying: A
- Insulation properties Degree of pollution: 3
- Flammability class according to UL 94: V0
- Seal material: FPM
- Plug Surface Material: PP
- Contact material: CuSn
- Contact surface material: Ni/Au
- Contact holder material: PP
- Screwed connection material: Stainless steel
- Contact resistance: ≤ 5 mΩ
- Insulation resistance: ≥ 100 MΩ
More info
▲| Product Type | Sensor Cable/Actuators |
| Number of poles | 4 |
| Application | Exterior |
| Number of cable outlets | 1 |
| Armored | Yes |
| Keying | A |
| Insulation properties | |
| Degree of pollution | 3 |
| Flammability class according to UL 94 | V0 |
| Seal material | FPM |
| Plug Surface Material | PP |
| Contact material | CuSn |
| Contact surface material | Ni/Au |
| Contact holder material | PP |
| Screwed connection material | Stainless steel |
| Contact resistance | ≤ 5 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Rated voltage UN | 48 V AC |
| 60 V DC | |
| Rated Current IN | 4 A |
| Protection circuit | Disconnected |
| Status display | No |
| Presence of a status display | No |
| Connection 1 | |
| Type | M12 straight male connector |
| Connection 2 | |
| Type | free end |
| Cable length | 28 m |
| PE-X Black [28X] | |
| Dimensioned drawing | |
| Armored | Yes |
| Sheath Weight | 74 kg/km |
| Type | PE-X black |
| Abbreviation | Li2X2X-C-Vl-2X |
| Cable Type (Symbol) | 28X |
| Outer diameter of the cable | 6.8 mm ±0.2 mm |
| Outer Sheath, Material | PE-X |
| Outer sheath, colour | grey-black RAL 7021 |
| Inner sheath material | PE-X |
| Conductive material | Bare Cu Cord |
| Conductor structure signal line | 28x 0.15 mm |
| AWG Signal Line | 20 |
| Cable section | 4x 0.5 mm² (Signal Line) |
| Wire Insulating Material | PE-X |
| Insulation thickness | approx. 0.3 mm (Wire insulation) |
| Wire diameter with insulation | 1.6 mm ±0.05 mm (Signal Line) |
| Yarn, colour | brown, white, blue, black |
| Total wiring | 4 longitudinally twisted wires |
| No wiring, total wiring | 108.8 mm |
| Shielding | Copper wire braid |
| Shielding Optical Coating | 85 % |
| Rated cable voltage | ≤ 300 V AC |
| Test Voltage Cable | ≥ 3000 V AC |
| Line Strength | ≤ 39 Ω/km (at 20 °C) |
| Line Insulation Resistance | ≥ 100 MΩ*km (at 20°C) |
| Line capacity | ≤ 100 nF/km (Driver-to-Driver, Unbalanced/Contact) |
| ≤ 85 nF/km (Conductor-to-Conductor, Unbalanced/Radial Quarte) | |
| ≤ 150 nF/km (Conductive Shield) | |
| Inductance | 0.64 mH/km (at 1 kHz) |
| 0.46 mH/km (at 10 MHz) | |
| Smallest bending radius, fixed installation | 34 mm |
| Smaller bending radius, flexible installation | 68 mm |
| Number of bending cycles | 1000000 |
| Bend Radius | 68 mm |
| Race | 10 m |
| Movement speed | 3 m/s |
| Acceleration | 10 m/s² |
| Halogen-free | according to DIN VDE 0472 Part 815 |
| Oil resistance | according to DIN EN 60811-2-1 |
| Resistance to flame spread | according to DIN 60332-1-2 |
| according to DIN EN 50266-2-5 | |
| Special Resistance | UV-resistant according to DIN VDE 0276-605 |
| Special properties | reticulated by irrad. |
| Ambient Temperature (Operating) | -15 °C ... 105 °C (Cable, Flexible Lay) |
| -40 °C ... 105 °C (cable, fixed installation) | |
| Environmental conditions | |
| Ambient Temperature (Operating) | -40 °C ... 105 °C (Male/Female Connector) |
| -40 °C ... 85 °C (in case of rapid temperature changes (according to IEC 60512-11-4)) | |
| M12 | |
| Designation of the standard | M12 connector |
| Standards/requirements | IEC 61076-2-101 |