PHOENIX CONTACT RIF-0-RPT-M-24DC/21 RIF-0-RPT-M-24DC/21 2908327 PHOENIX CONTACT Relay Module View larger
Images are for illustrative purposes only. Please refer to data sheet for details

RIF-0-RPT-M-24DC/21 2908327 PHOENIX CONTACT Relay Module

RIF-0-RPT-M-24DC/21

2908327

PHOENIX CONTACT

10 Pcs.

Relay Module Pre-assembled relay module with push-in connection, consisting of: relay socket with ejector and relay with power contact. Contact type: 1 switched contact. Input voltage: 24 V DC. Polarity: A1-, A2+ Preassembled relay module with Push-in connection, consisting of: relay base with ejector and power contact relay. Contact switching type: 1 changeover contact. Input voltage: 24 V DC. Polarity: A1-, A2+

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

A Phoenix Contact relay module, designated as RIF-0-RPT-M-24DC/21, is implemented in electrical distribution boards to switch medium-power loads reliably. These modules streamline wiring and enhance the modularity of control architectures in modern industrial plants.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product type: Relay Module
  • Product family: RIFLINE complete
  • Application: Universal
  • Operating mode: 100% operating factor
  • Mechanical service life: approx. 2x 10 7 cycles
  • Data management status Date of last data management: 09.08.2024
  • Article revision: 05
  • Insulation characteristics Insulation: safe isolation
  • Overvoltage category: III
  • Pollution degree: 2
  • Service life electrical: see diagram
  • Maximum power dissipation for nominal condition: 0.22 W
  • Test voltage (Winding/contact): 4 kV rms (50 Hz, 1 min., winding/contact)
  • Rated insulation voltage: 250 V AC
  • Short-circuit protection device Current: 10 A (RT28-32)
  • Voltage: 500 V (SCPD)

More info

▲
Technical data

Product properties
Product typeRelay Module
Product familyRIFLINE complete
ApplicationUniversal
Operating mode100% operating factor
Mechanical service lifeapprox. 2x 107cycles
Data management status
Date of last data management09.08.2024
Article revision05
Insulation characteristics
Insulationsafe isolation
Overvoltage categoryIII
Pollution degree2

Electrical properties
Service life electricalsee diagram
Maximum power dissipation for nominal condition0.22 W
Test voltage (Winding/contact)4 kVrms(50 Hz, 1 min., winding/contact)
Rated insulation voltage250 V AC
Short-circuit protection device
Current10 A (RT28-32)
Voltage500 V (SCPD)
Short-circuit current1 kA (conditional short-circuit current)

Input data
Coil side
Nominal operating voltage UN24 V DC
Input voltage range19.2 V DC ... 36 V DC (20 °C)
Input voltage range in reference to UNsee diagram
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN9 mA
Typical response time5 ms
Typical release time8 ms
Coil voltage24 V DC
Protective circuitFreewheeling diode
Operating voltage displayYellow LED

Output data
Switching
Contact switching type1 changeover contact
Type of switch contactSingle contact
Contact materialAgSnO
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V (100 mA)
Limiting continuous current6 A
Min. switching current10 mA (12 V)
Interrupting rating (ohmic load) max.140 W (24 V DC)
20 W (48 V DC)
18 W (60 V DC)
23 W (110 V DC)
40 W (220 V DC)
1500 VA (250 V AC)
Utilization category CB Scheme (IEC 60947-5-1)AC15, 3 A/250 V (N/O contact)
AC15, 1 A/250 V (N/C contact)
DC13, 1.5 A/24 V (N/O contact)
DC13, 0.2 A/110 V (N/O contact)
DC13, 0.1 A/220 V (N/O contact)

Connection data
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section rigid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section AWG24 ... 16

Dimensions
Width6.2 mm
Height92.5 mm
Depth77.7 mm

Material specifications
Colorgray (RAL 7042)
Flammability rating according to UL 94V2 (Housing)
Housing materialPA

Environmental and real-life conditions
Ambient conditions
Degree of protection (Relay base)IP20 (Relay base)
Degree of protection (Relay)RT III (Relay)
Ambient temperature (operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Approvals
UKCA
CertificateUKCA-compliant
Corrosive gas test
IdentificationISA-S71.04. G3 Harsh Group
EN 60068-2-60

Standards and regulations
Standards/regulationsIEC 60947-5-1

Mounting
Mounting typeDIN rail mounting
Assembly notein rows with zero spacing
Mounting positionany

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.