View larger
PLC-2RSC-24DC/ 1 2987309 PHOENIX CONTACT Relay Module
PLC-2RSC-24DC/ 1
2987309
PHOENIX CONTACT
10 Pcs.
Automation > Switching relay
Industrial Relays
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
A Phoenix Contact relay module, part number PLC-2RSC-24DC/ 1, is a compact interface component used to link electronic control units with field sensors and actuators. It provides electrical isolation, signal conversion, and switching capabilities inside industrial automation and instrumentation cabinets.
Pricing, availability, and lead time are confirmed per enquiry through an RFQ.
- Type of electric connection: Screw connection
- Complete with socket: Yes
- With detachable clamps: No
- With LED indication: Yes
- Rated control supply voltage DC: 18 V
- Voltage type for actuating: DC
- Drive, polarization: Polarized
- Drive, switching attitude: Mono stable
- Number of contacts as normally closed contact: 0
- Number of contacts as normally open contact: 2
- Number of contacts as change-over contact: 0
- Type of switch contact: Single contact
- With forced-guided contacts: No
- Material of contact surface: Untreated
- Nominal current: 0.007 A
- Degree of protection (IP): IP20
More info
▲Key Commercial Data
| Orderkey | 2987309 |
|---|---|
| Packing unit | 10 pc |
| Catalog page | Page 402 (C-5-2017) |
| GTIN | 4046356451215 |
| Weight per Piece (excluding packing) | 34.000 g |
| Custom tariff number | 85364190 |
| Country of origin | DE (Germany) |
Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|
Ambient conditions
| Ambient temperature (operation) | -20 °C ... 60 °C |
|---|---|
| Ambient temperature (storage/transport) | -20 °C ... 60 °C |
Coil side
| Nominal input voltage UN | 24 V DC |
|---|---|
| Typical input current at UN | 7 mA |
| Typical response time | 4 ms |
| Typical release time | 6 ms |
| Protective circuit | Reverse polarity protection Polarity protection diode |
| Free-wheeling diode Damping diode | |
| Operating voltage display | Yellow LED |
| Power dissipation for nominal condition | 0.17 W |
Contact side
| Contact type | 2 N/O contacts (2 relays with 1 N/O contact) |
|---|---|
| Type of switch contact | Single contact |
| Note regarding the switch contact | 2x |
| Contact material | AgNi |
| Maximum switching voltage | 250 V AC |
| 30 V DC | |
| Minimum switching voltage | 24 V AC/DC |
| Min. switching current | 5 mA |
| Limiting continuous current | 3.5 A |
| Interrupting rating (ohmic load) max. | 84 W (at 24 V DC) |
| 24 W (at 48 V DC) | |
| 24 W (at 60 V DC) | |
| 31 W (at 110 V DC) | |
| 46 W (at 220 V DC) | |
| 875 VA (for 250 V AC) |
Connection data 1
| Connection name | Coil side |
|---|---|
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 26 ... 14 |
Connection data 2
| Connection name | Contact side |
|---|---|
| Connection method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 26 ... 14 |
General
| Test voltage relay winding/relay contact | 3 kV AC (50 Hz, 1 min.) |
|---|---|
| Test voltage relay contact/relay contact | 3 kV AC (50 Hz, 1 min.) |
| Operating mode | 100% operating factor |
| Degree of protection | IP20 (Relay base) |
| Mechanical service life | 2x 107cycles |
| Mounting position | any |
| Assembly instructions | In rows with zero spacing |
| Net weight (SAP) | 34 g |
Standards and Regulations
| Designation | Air clearances and creepage distances between the power circuits |
|---|---|
| Standards/regulations | IEC 60664 |
| EN 50178 | |
| Rated insulation voltage | 250 V AC |
| Rated surge voltage | 4 kV |
| Insulation | Basic insulation |
| Degree of pollution | 2 |
| Overvoltage category | III |
| Flammability rating according to UL 94 | V0 |
Environmental Product Compliance
| China RoHS | Environmentally Friendly Use Period = 50 |
|---|---|
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |