PHOENIX CONTACT REL-MR-12DC/1ICT REL-MR- 12DC/1ICT 1081616 PHOENIX CONTACT Pluggable miniature power relay, with tungsten pre-contact for hig.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

REL-MR- 12DC/1ICT 1081616 PHOENIX CONTACT Pluggable miniature power relay, with tungsten pre-contact for hig..

REL-MR-12DC/1ICT

1081616

PHOENIX CONTACT

10 Pcs.

Pluggable miniature power relay, with tungsten pre-contact for high switch-on currents up to 800 A peaks, 1 N/O contact, input voltage: 12 V DC Pluggable miniature power relay, with tungsten advance contact for high input currents up to 800 A Peak, 1 normally open contact, input voltage 12 V DC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Featuring a compact footprint, the Phoenix Contact pluggable miniature power relay model REL-MR-12DC/1ICT acts as an essential switching element in automated control loops. Miniature power relays allow small controller output signals to safely switch larger currents for actuators, solenoids, and indicators.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Complete with socket (EF003359): No
  • With detachable clamps (EF003340): No
  • With LED indication (EF005950): No
  • Rated control supply voltage DC (EF003980): 9.6 V
  • Voltage type for actuating (EF008242): DC
  • Drive, polarization (EF003355): Polarity free
  • Drive, switching attitude (EF003356): Mono stable
  • Number of contacts as normally closed contact (EF008255): 0
  • Number of contacts as normally open contact (EF008256): 1
  • Number of contacts as change-over contact (EF008257): 0
  • Type of switch contact (EF003358): Single contact
  • With forced-guided contacts (EF003357): No
  • Material of contact surface (EF004020): Untreated
  • Nominal current (EF000001): 0.033 A
  • Width (EF000008): 12.7 mm
  • Height (EF000040): 29 mm

More info

▲

Key Commercial Data

Orderkey1081616
Packing unit1 pc
Minimum order quantity10 pc
GTIN4055626807881
Weight per Piece (excluding packing)0.000 g
Custom tariff number85364900
Country of originAT (Austria)

Drawings



Drilling diagram
a = pitch division 2.5 mm

Diagram
Curve A
Maximum permissible continuous voltage Umaxwith limiting continuous current on the contact side (see relevant technical data)
Curve B
Minimum permissible operate voltage Uopafter pre-excitation (see relevant technical data)



Dimensional drawing

Circuit diagram



Back to top

Dimensions

Width12.7 mm
Height29 mm
Depth15.7 mm
Back to top

Ambient conditions

Ambient temperature (operation)-40 °C ... 85 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Maximum altitude≤ 2000 m
Degree of protectionRT II
Back to top

Coil side

Nominal input voltage UN12 V DC
Input voltage range in reference to UNsee diagram
Typical input current at UN33 mA
Typical response time8 ms
Typical release time3 ms
Coil resistance360 Ω ±10 % (20 °C)
Power dissipation for nominal condition0.4 W
Back to top

Contact side

Contact type1 N/O contact
Type of switch contactSingle contact
Contact materialAgSnO
Maximum switching voltage250 V AC/DC
Minimum switching voltage12 V (100 mA)
Min. switching current100 mA (at 12 V DC)
Maximum inrush current165 A (20 ms)
800 A (200 µs)
Limiting continuous current16 A
Interrupting rating (ohmic load) max.384 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
4000 VA (for 250 V AC)
Switching capacity min.1200 mW
Back to top

General

Test voltage relay winding/relay contact5 kV AC (50 Hz, 1 min.)
Operating mode100% operating factor
Mechanical service life3x 107cycles
Mounting positionany
Assembly instructionsCan be aligned without spacing (> 70 °C ≥ 2.5 mm)
Back to top

Standards and Regulations

Standards/regulationsEN 50178
EN 61810-1
Rated insulation voltage250 V AC
Rated surge voltage6 kV
InsulationSafe isolation, reinforced insulation
Pollution degree3
Overvoltage categoryIII
Back to top

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Back to top

Classifications

eCl@ss

eCl@ss 8.027371601
eCl@ss 9.027371601
Back to top

ETIM

ETIM 5.0EC001437
ETIM 6.0EC001437
ETIM 7.0EC001437
Back to top

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.