View larger
Q 1,5/3FS/13-13KU-ESA BK 1670989 PHOENIX CONTACT Panel feed-through
Q 1,5/3FS/13-13KU-ESA BK
1670989
PHOENIX CONTACT
10 Pcs.
Connectors > Sensor-actuator connector chassis
QUICKON Installation System (QPD)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Q 1,5/3FS/13-13KU-ESA BK 1670989 PHOENIX CONTACT Panel feed-through facilitates secure conductor passage through partition walls in industrial electrical enclosures. These pass-through terminals combine insulation and mechanical anchoring to streamline complex internal-to-external wiring tasks.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Panel feed-through
- Number of positions: 3
- Insulation characteristics Overvoltage category: III
- Degree of pollution: 3
- Connection technology Connection method On the device side: Manual solder/slip on connection
- Connection method On the field side: IDC connection
- Conductor connection Conductor cross section flexibel: 0.75 mm² ... 1.5 mm²
- Conductor connection Conductor cross section solid: 0.75 mm² ... 1 mm²
- Connection cross section AWG: 18 ... 16
- Tightening torque Union nut: 2.5 Nm
- Tightening torque Contact carrier: 3.75 Nm
- Tightening torque Locking nut: 3.75 Nm
- Wrench size Union nut: 24 mm
- Wrench size Contact carrier: 24 mm
- Rated surge voltage (II/2): 6 kV
- Rated surge voltage (III/2): 6 kV
More info
▲| Product type | Panel feed-through |
| Number of positions | 3 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Connection technology | |
| Connection method On the device side | Manual solder/slip on connection |
| Connection method On the field side | IDC connection |
| Frequency of connections between conductors of the same cross section | 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) |
| Conductor connection | |
| Conductor cross section flexibel | 0.75 mm² ... 1.5 mm² |
| Conductor cross section solid | 0.75 mm² ... 1 mm² |
| Connection cross section AWG | 18 ... 16 |
| Tightening torque Union nut | 2.5 Nm |
| Tightening torque Contact carrier | 3.75 Nm |
| Tightening torque Locking nut | 3.75 Nm |
| Wrench size Union nut | 24 mm |
| Wrench size Contact carrier | 24 mm |
| Rated surge voltage (II/2) | 6 kV |
| Rated surge voltage (III/2) | 6 kV |
| Rated surge voltage (III/3) | 6 kV |
| rated voltage (II/2) | 630 V (with insulating sleeve) |
| rated voltage (III/2) | 320 V (with insulating sleeve) |
| Rated voltage (III/3) | 500 V |
| Nominal voltage UN | 500 V AC |
| 500 V DC | |
| Nominal current IN | 17.5 A |
| Color | black (RAL 9005) |
| Flammability rating according to UL 94 | V0 |
| Material wire insulation | PVC / PE |
| Contact material | Copper alloy |
| Contact surface material | Pre-nickel plated and tin-plated |
| Contact carrier material | PA 6.6 |
| Structure of individual litz in acc. with VDE 0295 / smallest wire diameter | VDE 0295 Cl.2-5, min. wire diameter 0.2 mm |
| Wire diameter including insulation | >= 3 mm |
| Mounting type | M20 |
| Assembly note | If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. |
| Ambient conditions | |
| Degree of protection | IP65 |
| IP67 | |
| Ambient temperature (operation) | -25 °C ... 80 °C (specifications of the cable manufacturer must also be observed) |
| Temperature when conductor connected | -25 °C ... 50 °C (specifications of the cable manufacturer must also be observed) |