View larger
Q 1,5/2FL/11-11KU-ESA BK 1670947 PHOENIX CONTACT Connector set
Q 1,5/2FL/11-11KU-ESA BK
1670947
PHOENIX CONTACT
10 Pcs.
Cables > Circular connector, mounting (without cable)
QUICKON Installation System (QPD)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
This Phoenix Contact Q 1,5/2FL/11-11KU-ESA BK 1670947 PHOENIX CONTACT Connector set functions as a panel feed-through component designed to securely bridge electrical circuits across enclosure walls. Panel feed-through parts provide reliable transition points for power or signal lines entering industrial machinery and control cabinets, ensuring mechanical stability and environmental separation.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Panel feed-through
- Number of positions: 2
- Insulation characteristics Overvoltage category: III
- Degree of pollution: 3
- Connection technology Connection method On the device side: Manual solder/slip on connection
- Connection method On the field side: IDC connection
- Conductor connection Conductor cross section flexibel: 0.75 mm² ... 1.5 mm²
- Conductor connection Conductor cross section solid: 0.75 mm² ... 1 mm²
- Connection cross section AWG: 18 ... 16
- Tightening torque Union nut: 2.5 Nm
- Tightening torque Contact carrier: 3.75 Nm
- Tightening torque Locking nut: 3.75 Nm
- Wrench size Union nut: 22 mm
- Wrench size Contact carrier: 22 mm
- Rated surge voltage (III/3): 6 kV
- rated voltage (II/2): 630 V (with insulating sleeve)
More info
▲| Product type | Panel feed-through |
| Number of positions | 2 |
| Insulation characteristics | |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Connection technology | |
| Connection method On the device side | Manual solder/slip on connection |
| Connection method On the field side | IDC connection |
| Frequency of connections between conductors of the same cross section | 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) |
| Conductor connection | |
| Conductor cross section flexibel | 0.75 mm² ... 1.5 mm² |
| Conductor cross section solid | 0.75 mm² ... 1 mm² |
| Connection cross section AWG | 18 ... 16 |
| Tightening torque Union nut | 2.5 Nm |
| Tightening torque Contact carrier | 3.75 Nm |
| Tightening torque Locking nut | 3.75 Nm |
| Wrench size Union nut | 22 mm |
| Wrench size Contact carrier | 22 mm |
| Rated surge voltage (III/3) | 6 kV |
| rated voltage (II/2) | 630 V (with insulating sleeve) |
| rated voltage (III/2) | 320 V (with insulating sleeve) |
| Rated voltage (III/3) | 250 V (with insulating sleeve) |
| Nominal voltage UN | 250 V AC |
| 250 V DC | |
| Nominal current IN | 17.5 A |
| Color | black (RAL 9005) |
| Flammability rating according to UL 94 | V0 |
| Material wire insulation | PVC / PE |
| Contact material | Copper alloy |
| Contact surface material | Pre-nickel plated and tin-plated |
| Contact carrier material | PA 6.6 |
| Structure of individual litz in acc. with VDE 0295 / smallest wire diameter | VDE 0295 Cl.2-5, min. wire diameter 0.2 mm |
| Wire diameter including insulation | >= 3 mm |
| Assembly note | If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. |
| Ambient conditions | |
| Degree of protection | IP65 |
| IP67 | |
| Ambient temperature (operation) | -25 °C ... 80 °C (specifications of the cable manufacturer must also be observed) |
| Temperature when conductor connected | -25 °C ... 50 °C (specifications of the cable manufacturer must also be observed) |