PHOENIX CONTACT PV-ED6/Y-120(2+/1-) PV-ED6/Y-120(2+/1-) 1030649 PHOENIX CONTACT Photovoltaic Y-distributor PV-ED6/Y-120(2+/1-) 1030649 View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PV-ED6/Y-120(2+/1-) 1030649 PHOENIX CONTACT Photovoltaic Y-distributor PV-ED6/Y-120(2+/1-) 1030649

PV-ED6/Y-120(2+/1-)

1030649

PHOENIX CONTACT

10 Pcs.

Photovoltaic Y-distributor - PV-ED6/Y-120(2+/1-) - 1030649 Y photovoltaic distributor, Family of items: Sunclix, housing material: PPE, color: black Photovoltaic Y-distributor, Range of articles: SUNCLIX, housing material: PPE, color: black

Automation > Sensor-actuator patch cord
Field Device Connectors (FDC)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

PV-ED6/Y-120(2+/1-) 1030649 PHOENIX CONTACT Photovoltaic Y-distributor PV-ED6/Y-120(2+/1-) 1030649 is engineered for solar power installations to safely branch and combine DC lines from photovoltaic modules to string inverters. These specialized junction accessories maintain high electrical ratings required for utility-scale and commercial renewable energy systems.

Pricing, availability, and lead time are confirmed per enquiry through an RFQ.

  • Product type: Power distributor
  • Product family: SUNCLIX
  • Insulation characteristics Degree of pollution: 2
  • Length: 120 mm
  • Rated voltage (II/2): 1000 V
  • Rated voltage (III/2): 1500 V
  • Rated surge voltage (II/2): 12 kV
  • Rated surge voltage (III/2): 12 kV
  • Rated surge voltage (III/3): 16 kV
  • Color: black
  • Color of the housing part: black
  • Flammability rating according to UL 94: V0
  • Insulating material group: I / CTI 600
  • Housing material: PPE
  • Cable seal material: EPDM
  • Contact material: Cu

More info

▲
Technical data

Notes
Safety note
Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that the protective or functional ground has been properly connected.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without twisting it.

Product properties
Product typePower distributor
Product familySUNCLIX
Insulation characteristics
Degree of pollution2

Dimensions
Length120 mm

Electrical properties
Rated voltage (II/2)1000 V
Rated voltage (III/2)1500 V
Rated surge voltage (II/2)12 kV
Rated surge voltage (III/2)12 kV
Rated surge voltage (III/3)16 kV

Material specifications
Colorblack
Color of the housing partblack
Flammability rating according to UL 94V0
Insulating material groupI / CTI 600
Housing materialPPE
Cable seal materialEPDM
Contact materialCu
Contact surface materialAg
Contact carrier materialPPE
O-ring materialSilopren

Cable/line
Cable typeH1Z2Z2-K

Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-40 °C ... 85 °C

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.