View larger
BC 17 REL-S/MSTB/R10K/R1K 1003549 PHOENIX CONTACT Relay Module
BC 17 REL-S/MSTB/R10K/R1K
1003549
PHOENIX CONTACT
50 Pcs.
Automation > Switching relay
Industrial Relays
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact BC 17 REL-S/MSTB/R10K/R1K is a Relay Module intended for interfacing logic controllers with higher-load industrial actuators and sensors. These modules provide galvanic isolation and signal switching within control panels to protect sensitive electronic equipment.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Orderkey: 1003549
- Packing unit: 1
- GTIN: 4055626470863
- Custom tariff number: 85364190
- Utilization restriction: EMC: class A product, see manufacturer's declaration in the download area
- Width: 17.8 mm
- Height: 90 mm
- Depth: 61 mm
- Ambient temperature (operation): -20 °C ... 50 °C
- Nominal input voltage U N: 24 V DC
- Input voltage range in reference to U N: 0.8 ... 1.1
- Typical input current at U N: 10 mA
- Protective circuit: Bridge rectifier Bridge rectifier, varistor
- Operating voltage display: LED
- Contact type: 1 N/C contact
- Contact material: AgSnO 2 , gold-plated
More info
▲Note
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
|---|
Coil side
| Nominal input voltage UN | 24 V DC |
|---|---|
| Input voltage range in reference to UN | 0.8 ... 1.1 |
| Typical input current at UN | 10 mA |
| Protective circuit | Bridge rectifier Bridge rectifier, varistor |
| Capacitor Capacitor | |
| Operating voltage display | LED |
Contact side
| Contact type | 1 N/C contact |
|---|---|
| Contact material | AgSnO2, gold-plated |
| Note | One 1 kΩ resistor is connected in series and one 10 kΩ resistor is connected in parallel with the output |
| Maximum switching voltage | 30 V AC |
| Limiting continuous current | max. 10 mA |
General
| Degree of protection | IP20 |
|---|---|
| Mounting position | any |
| Assembly instructions | In rows with zero spacing |
| Net weight (SAP) | 76 g |
Standards and Regulations
| Designation | Air clearances and creepage distances, input/output |
|---|---|
| Standards/regulations | EN 50178 |
| Rated insulation voltage | 250 V |
| Rated surge voltage/insulation | Basic insulation |
| Rated surge voltage | 4 kV (1.2/50 μs) |
| Degree of pollution | 2 |
| Overvoltage category | III |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |