View larger
PTF 0,3/ 4-WB-10-H 1707565 PHOENIX CONTACT Printed-circuit board connector
PTF 0,3/ 4-WB-10-H
1707565
PHOENIX CONTACT
20 Pcs.
Cables > Cable connector
PCB Connectors (PCC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact PTF 0,3/ 4-WB-10-H assembled PCB connector is engineered for specialized low-voltage circuit board interconnections, providing an efficient method for linking modular electronic sub-assemblies. These connectors are frequently utilized within specialized lighting systems, display units, and miniature sensing arrays where space constraints dictate precise form factors. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Assembled PCB connector
- Product family: PTF 0,3/..-WB-H
- Product line: COMBICON Connectors Special
- Number of positions: 4
- Pitch: 2.40 mm
- Number of connections: 4
- Number of rows: 1
- Number of potentials: 4
- Data management status Article revision: 01
- Nominal voltage U N: < 25 V
- Rated voltage (III/3): 25 V
- Rated voltage (III/2): 25 V
- Mounting type: Direct plug-in method
- Note regarding documentation: Refer to the installation note in the download area.
- Pitch: 2.40 mm
- Length [l]: 9.00 mm
More info
▲| Product type | Assembled PCB connector |
| Product family | PTF 0,3/..-WB-H |
| Product line | COMBICON Connectors Special |
| Number of positions | 4 |
| Pitch | 2.40 mm |
| Number of connections | 4 |
| Number of rows | 1 |
| Number of potentials | 4 |
| Data management status | |
| Article revision | 01 |
| Nominal voltage UN | < 25 V |
| Rated voltage (III/3) | 25 V |
| Rated voltage (III/2) | 25 V |
| Mounting type | Direct plug-in method |
| Note regarding documentation | Refer to the installation note in the download area. |
| Dimensional drawing | |
| Pitch | 2.40 mm |
| Length [l] | 9.00 mm |
| Tensile strength of crimp connections | |
| Result | Test passed |
| Temperature-rise test | |
| Specification | IEC 60838-1:2004-10 + AMD 1:2008-07 + AMD 2:2011-03 |
| Requirement temperature-rise test | Increase in temperature ≤ 45 K |
| Insulation resistance | |
| Specification | IEC 60838-1:2004-10 + AMD 1:2008-07 + AMD 2:2011-03 |
| Insulation resistance, neighboring positions | > 1 MΩ |
| Air clearances and creepage distances | |
| Specification | IEC 60838-1:2004-10 + AMD 1:2008-07 + AMD 2:2011-03 |
| Insulating material group | IIIa |
| Rated insulation voltage (III/3) | 25 V |
| Rated insulation voltage (III/2) | 25 V |
| Vibration test | |
| Specification | IEC 60068-2-6:2007-12 |
| Frequency | 10 - 500 - 10 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Test duration per axis | 2 h |
| Test directions | X-, Y- and Z-axis |
| Glow-wire test | |
| Specification | IEC 60695-2-11:2000-10 |
| Temperature | 650 °C |
| Time of exposure | 30 s |
| Ambient conditions | |
| Ambient temperature (operation) | -30 °C ... 100 °C (dependent on the derating curve) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Connection 1 | |
| Insulating material | PBT |
| CTI according to IEC 60112 | 275 |