View larger
PST 1,3/ 4-5,0 GY VPE250 1107396 PHOENIX CONTACT Male connector, nominal current: 12 A, number of poles: 4, ..
PST 1,3/ 4-5,0 GY VPE250
1107396
PHOENIX CONTACT
250 Pcs.
Connectors > Printed circuit board connector
PCB Connectors (PCC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact PST 1,3/ 4-5,0 GY VPE250 male connector functions as a reliable pin strip for interfacing with pluggable terminal blocks in control engineering applications. Pin strips like this provide sturdy male contact points on printed circuit boards to ensure consistent signal and power transmission. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product Type: Plug
- Product Family: PST 1.3/.. -V
- Product Line: COMBICON Connectors M
- Number of poles: 4
- Step: 5 mm
- Number of rows: 1
- Pin Layout: Linear Pinning
- Data maintenance status Article review: 00
- Rated Current I N: 12 A (Regardless of the connector used)
- Rated voltage U N: 320 V
- Mass Resistivity: 1.6 mΩ
- Sizing voltage (III/3): 250 V
- Sizing impulse voltage (III/3): 4 kV
- Sizing voltage (III/2): 320 V
- Sizing Impulse Voltage (III/2): 4 kV
- Sizing voltage (II/2): 400 V
More info
▲| Product Type | Plug |
| Product Family | PST 1.3/.. -V |
| Product Line | COMBICON Connectors M |
| Number of poles | 4 |
| Step | 5 mm |
| Number of rows | 1 |
| Pin Layout | Linear Pinning |
| Data maintenance status | |
| Article review | 00 |
| Rated Current IN | 12 A (Regardless of the connector used) |
| Rated voltage UN | 320 V |
| Mass Resistivity | 1.6 mΩ |
| Sizing voltage (III/3) | 250 V |
| Sizing impulse voltage (III/3) | 4 kV |
| Sizing voltage (III/2) | 320 V |
| Sizing Impulse Voltage (III/2) | 4 kV |
| Sizing voltage (II/2) | 400 V |
| Sizing Impulse Voltage (II/2) | 4 kV |
| Mounting type | TTHR / wave soldering |
| Pin Layout | Linear Pinning |
| Processing Instructions | |
| Moisture Sensitive Level | MSL 1 |
| Classification Temperature Tc | 260 °C |
| Reflow Soldering Cycles | 3 |
| Material information - contacts | |
| note | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
| Contact Material | Cu Alloy |
| Surface Finish | Galvanic tin plating |
| Metal surface contact zone (surface layer) | Tin (3 - 5 μm Sn) |
| Metal surface contact area (middle layer) | Nickel (1 - 3 μm Ni) |
| Metal Surface Welding Area (Surface Layer) | Tin (3 - 5 μm Sn) |
| Metal Surface Weld Area (Middle Layer) | Nickel (1 - 3 μm Ni) |
| Material information - case | |
| Color (Case) | Grey (7042) |
| Insulation material | PA |
| Insulation Material Group | IIIa |
| CTI according to IEC 60112 | 250 |
| Combustibility class according to UL 94 | V0 |
| Flammability index of GWFI filament according to EN 60695-2-12 | 850 |
| GWIT filament ignition temperature according to EN 60695-2-13 | 775 |
| Brinell hardness test temperature according to EN 60695-10-2 | 125 °C |
| Dimensioned Drawing | |
| Step | 5 mm |
| Width [w] | 20 mm |
| Height [h] | 13 mm |
| Length [l] | 2.8 mm |
| Installation Height | 9.5 mm |
| Weld Shank Length [P] | 3.5 mm |
| Shank sizes | ø 1.3 mm |
| Printed circuit board design | |
| Bore diameter | 1.3 mm |
| Visual inspection | |
| Test Specification | DIN EN 60512-1-1:2003-01 |
| Result | Test passed |
| Dimensional control | |
| Test Specification | DIN EN 60512-1-2:2003-01 |
| Result | Test passed |
| Insertion/tensile force | |
| Result | Test passed |
| Number of cycles | 25 |
| Insertion force per pole approx. | 5 N |
| Tensile force per pole approx. | 5 N |
| Contact holder in use | |
| Test Specification | DIN EN 60512-15-1:2009-03 |
| Areas of application for contact holders Application >20 N | Test passed |
| Resistance of lettering | |
| Test Specification | DIN EN 60068-2-70:1996-07 |
| Result | Test passed |
| Thermal Test Control Group C | |
| Test Specification | DIN EN 60512-5-1:2003-01 |
| Number of poles tested | 12 |
| Insulation Resistance | |
| Test Specification | DIN EN 60512-3-1:2003-01 |
| Insulation Resistance Between Contiguous Poles | > 5 MΩ |
| Temperature Cycling | |
| Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Result | Test passed |
| Creepage and Creepage Distances | |
| Test Specification | DIN EN 60664-1 (VDE 0110-1):2008-01 |
| Insulation Material Group | IIIa |
| Resistance to surface currents (DIN EN 60112 (VDE 0303-11)) | CTI 250 |
| Rated insulation voltage (III/3) | 250 V |
| Rated impulse voltage (III/3) | 4 kV |
| Minimum clearance value - inhomogeneous range (III/3) | 3 mm |
| Minimum creepage value (III/3) | 4 mm |
| Rated Isolation Voltage (III/2) | 320 V |
| Rated impulse voltage (III/2) | 4 kV |
| Minimum creepage value - inhomogeneous range (III/2) | 3 mm |
| Minimum creepage value (III/2) | 3.2 mm |
| Rated Isolation Voltage (II/2) | 400 V |
| Rated Impulse Voltage (II/2) | 4 kV |
| Minimum creepage value - inhomogeneous range (II/2) | 3 mm |
| Minimum creepage value (II/2) | 4 mm |
| Vibration test | |
| Test Specification | DIN EN 60068-2-6 (VDE 0468-2-6):2008-10 |
| Frequency | 10 - 150 - 10 Hz |
| Sweep Speed | 1 octave/min |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Test duration per axle | 2.5 h |
| Test Directions | X, Y, and Z axis |
| Electrical life control | |
| Test Specification | DIN EN 60512-9-1 (VDE 0687-512-9-1):2010-12 |
| Vertical impulse tension above sea level | 4.8 kV |
| Mass Resistivity R1 | 1.6 mΩ |
| Mass Resistivity R2 | 1.7 mΩ |
| Manoeuvring cycles | 25 |
| Insulation Resistance Between Contiguous Poles | > 5 MΩ |
| Climate control | |
| Test Specification | DIN EN ISO 6988:1997-03 |
| Stress due to corrosion | 0.2 dm3KNOW2on 300 dm3/40 °C/1 cycle |
| Stress due to the effect of heat | 100 °C/168 h |
| Fixed AC voltage | 2.21 kV |
| Environmental conditions | |
| Ambient temperature (operating) | -40 °C ... 100 °C (depending on derating curve) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Relative humidity (transport and storage) | 30 % ... 70 % |
| Ambient temperature (mounting) | -5 °C ... 100 °C |
| Packaging | Packed in carton |