View larger
PST 1,3/ 3-5,0 YE VPE250 1107410 PHOENIX CONTACT Male connector, nominal current: 12 A, number of poles: 3, ..
PST 1,3/ 3-5,0 YE VPE250
1107410
PHOENIX CONTACT
250 Pcs.
Connectors > Printed circuit board connector
PCB Connectors (PCC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
This yellow Phoenix Contact PST 1,3/ 3-5,0 YE VPE250 male connector provides a standardized interface for plugging internal wire assemblies into printed circuit boards. Pin headers of this design are widely implemented in commercial automation electronics. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product Type: Male connector
- Product Family: PST 1.3/.. -V
- Product Line: COMBICON Connectors M
- Number of poles: 3
- Step: 5 mm
- Number of rows: 1
- Pin Design: Linear Pin Arrangement
- Data Maintenance Status Article Review: 00
- Nominal Current I N: 12 A (Depending on the connector used)
- Nominal voltage U N: 320 V
- Contact resistance: 1.6 mΩ
- Sizing voltage (III/3): 250 V
- Dimensioning transient voltage (III/3): 4 kV
- Dimensioning voltage (III/2): 320 V
- Dimensioning Transient Voltage (III/2): 4 kV
- Nominal voltage (II/2): 400 V
More info
▲| Product Type | Male connector |
| Product Family | PST 1.3/.. -V |
| Product Line | COMBICON Connectors M |
| Number of poles | 3 |
| Step | 5 mm |
| Number of rows | 1 |
| Pin Design | Linear Pin Arrangement |
| Data Maintenance Status | |
| Article Review | 00 |
| Nominal Current IN | 12 A (Depending on the connector used) |
| Nominal voltage UN | 320 V |
| Contact resistance | 1.6 mΩ |
| Sizing voltage (III/3) | 250 V |
| Dimensioning transient voltage (III/3) | 4 kV |
| Dimensioning voltage (III/2) | 320 V |
| Dimensioning Transient Voltage (III/2) | 4 kV |
| Nominal voltage (II/2) | 400 V |
| Dimensioning transient voltage (II/2) | 4 kV |
| Type of mounting | THR welding/wave welding |
| Pin Design | Linear Pin Arrangement |
| Processing Instructions | |
| Moisture Sensitive Level | MSL 1 |
| Classification Temperature Tc | 260 °C |
| Welding cycles. by reflux | 3 |
| Material data - contact | |
| Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Contact material | Cu Alloy |
| Surface Characteristics | Galvanically tinned |
| Metal surface contact area (top layer) | Tin (3 - 5 μm Sn) |
| Metal Surface Contact Area (Middle Layer) | Nickel (1 - 3 μm Ni) |
| Metal surface weld area (top layer) | Tin (3 - 5 μm Sn) |
| Metal Surface Welding Area (Middle Layer) | Nickel (1 - 3 μm Ni) |
| Material data - housing | |
| Color (Housing) | Yellow (1018) |
| Insulating material | PA |
| Insulating material group | IIIa |
| CTI according to IEC 60112 | 250 |
| Flammability class according to UL 94 | V0 |
| Flammability number of GWFI incandescent filaments according to EN 60695-2-12 | 850 |
| Ignition temperature of incandescent filaments GWIT according to EN 60695-2-13 | 775 |
| Ball hardness test temperature according to EN 60695-10-2 | 125 °C |
| Dimension Scheme | |
| Step | 5 mm |
| Width [w] | 15 mm |
| Height [h] | 13 mm |
| Length [l] | 2.8 mm |
| Overall Height | 9.5 mm |
| Weld Pin Length [P] | 3.5 mm |
| Temple Dimensions | ø 1.3 mm |
| Printed circuit board design | |
| Hole diameter | 1.3 mm |
| Eye Exam | |
| Test Specification | DIN EN 60512-1-1:2003-01 |
| Result | Approved Test |
| Dimensional Examination | |
| Test Specification | DIN EN 60512-1-2:2003-01 |
| Result | Approved Test |
| Forces when plugging in and unplugging | |
| Result | Approved Test |
| Number of cycles | 25 |
| Plug-in force approx. | 5 N |
| Power when unplugging by pole approx. | 5 N |
| Used contact holder | |
| Test Specification | DIN EN 60512-15-1:2009-03 |
| Contact Holder Used Requirement >20 N | Approved Test |
| Resistance of the signs | |
| Test Specification | DIN EN 60068-2-70:1996-07 |
| Result | Approved Test |
| Thermal Test Test Group C | |
| Test Specification | DIN EN 60512-5-1:2003-01 |
| Number of poles tested | 12 |
| Insulation resistance | |
| Test Specification | DIN EN 60512-3-1:2003-01 |
| Insulation Resistance Adjacent Poles | > 5 MΩ |
| Temperature Cycles | |
| Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Result | Approved Test |
| Creepage Lines & Air Isolation Distances | |
| Test Specification | DIN EN 60664-1 (VDE 0110-1):2008-01 |
| Insulating material group | IIIa |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 250 |
| Sizing Insulation Voltage (III/3) | 250 V |
| Nominal transient voltage (III/3) | 4 kV |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 3 mm |
| Minimum creepage line value (III/3) | 4 mm |
| Sizing Insulation Voltage (III/2) | 320 V |
| Nominal transient voltage (III/2) | 4 kV |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 3 mm |
| Minimum creepage line value (III/2) | 3.2 mm |
| Sizing Insulation Voltage (II/2) | 400 V |
| Nominal transient voltage (II/2) | 4 kV |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 3 mm |
| Minimum creepage line value (II/2) | 4 mm |
| Vibration test | |
| Test Specification | DIN EN 60068-2-6 (VDE 0468-2-6):2008-10 |
| frequency | 10 - 150 - 10 Hz |
| Sweep speed | 1 octave/min |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Test duration per axis | 2.5 h |
| Test Directions | X, Y, and Z axes |
| Durability Test | |
| Test Specification | DIN EN 60512-9-1 (VDE 0687-512-9-1):2010-12 |
| Bearable shock voltage at sea level | 4.8 kV |
| Contact Resistance R1 | 1.6 mΩ |
| Contact Resistance R2 | 1.7 mΩ |
| Plug Cycles | 25 |
| Insulation Resistance Adjacent Poles | > 5 MΩ |
| Climate Essay | |
| Test Specification | DIN EN ISO 6988:1997-03 |
| Corrosion fatigue | 0.2 dm3UNDER2in 300 dm3/40 °C/1 cycle |
| Thermal stress | 100 °C/168 h |
| Bearable AC voltage | 2.21 kV |
| Environmental conditions | |
| Ambient Temperature (Service) | -40 °C ... 100 °C (depending on the rating curve) |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| Ambient Temperature (Mounting) | -5 °C ... 100 °C |
| Type of packaging | Boxed Packaging |