PHOENIX CONTACT PSR-SCP-24DC/URM4/5X1/2X2/B PSR-SCP- 24DC/URM4/5X1/2X2/B 1442344 PHOENIX CONTACT Contact expansion 1 or 2 channels, 5 NO contacts, 1 NC .. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PSR-SCP- 24DC/URM4/5X1/2X2/B 1442344 PHOENIX CONTACT Contact expansion 1 or 2 channels, 5 NO contacts, 1 NC ..

PSR-SCP-24DC/URM4/5X1/2X2/B

1442344

PHOENIX CONTACT

1 Pcs.

Contact expansion 1 or 2 channels, 5 NO contacts, 1 NC contact, 1 feedback circuit, together with base equipment safe separation up to cat. 4 PL e according to EN ISO 13849, width: 22.5 mm, plug-in screw terminal block Extension of 1 or 2 channel contacts, 5 NO contacts, 1 NC contact, 1 feedback loop, together with base equipment safe separation up to cat.4 PLe depending on ENISO13849, width: 22.5mm, plug-in screw terminal Expand. Cont. 1 or 2 channels, 5 cont. in closing, 1 cont. in apert., 1 retro-action circuit, together with the base unit up to cat. 4 PL e in accordance with EN ISO 13849 safe separation, width: 22.5 mm, plug-in screw terminal

Automation > Device for monitoring of safety-related circuits
Safety

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Contact expansion safety relay identified as the Phoenix Contact PSR-SCP- 24DC/URM4/5X1/2X2/B, built to provide additional safe switching paths for high-current industrial actuators. Such modules operate downstream of safety control units, amplifying the switching capacity to handle heavier loads while preserving fault-tolerant monitoring integrity.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product Type: Safety Relays
  • Product Family: PSRclassic
  • Application: Expansion module
  • Mechanical life: 10x 10 6 Manoeuvring cycles
  • Relay Type: Electromagnetic relay with forcibly guided contacts according to IEC/EN 61810-3
  • Times Tip. Excitation time with U s: < 25 ms (Us/command via A1)
  • Typical Drop-Out Time: < 20 ms (Us/command via A1)
  • Reset Time: < 1 s
  • Maximum power dissipation under nominal conditions: 16.6 W (U S = 26.4 V, I L ² = 72 A², P Total max = 2.2 W + 14.4 W)
  • Duty cycle report: 100 % ED
  • Impulse voltage sizing/isolation: See chapter Insulation coordination
  • Digital: A1 Entrance description: Security-oriented
  • Number of inputs: 1
  • Signal input range "1": 19.2 V ... 26.4 V
  • Max. permissible cable resistance: 25 Ω
  • Protection Circuit: Diode Suppressor

More info

▲
Technical data

Article features
Product TypeSafety Relays
Product FamilyPSRclassic
ApplicationExpansion module
Mechanical life10x 106Manoeuvring cycles
Relay TypeElectromagnetic relay with forcibly guided contacts according to IEC/EN 61810-3
Times
Tip. Excitation time with Us< 25 ms (Us/command via A1)
Typical Drop-Out Time< 20 ms (Us/command via A1)
Reset Time< 1 s

Electrical characteristics
Maximum power dissipation under nominal conditions16.6 W (US= 26.4 V, IL² = 72 A², PTotal max= 2.2 W + 14.4 W)
Duty cycle report100 % ED
Air and surface distances between circuits
Rated insulation voltage250 V
Impulse voltage sizing/isolationSee chapter Insulation coordination

Input Data
Digital: A1
Entrance descriptionSecurity-oriented
Number of inputs1
Signal input range "1"19.2 V ... 26.4 V
Max. permissible cable resistance25 Ω
Protection CircuitDiode Suppressor
Current consumptiontip. 75 mA

Output Data
Relay: Safety Contacts (23/24 ... 63/64)
Output Descriptioneach 2 NO in series, safe, potential-free
Number of outputs5
Contact Switching Type5 safety contacts
Contact materialAgSnO2
Switchable voltageMin. 10 V
max. 250 V AC/DC
Switchable powerMin. 100 mW
Instantaneous currentMin. 10 mA
max. 20 A (≤ 100 ms)
Breaking capacity IEC 60947-5-13 A (AC15)
5 A (DC13)
Permanent Load Current6 A (take into account derating)
arit. Total current72 A2(take into account derating)
Switching frequencymax. 1 Hz
Mechanical life10x 106Manoeuvring cycles
Output fuse10 A gL/gG
4 A gL/gG (for Low Demand applications)
Relay: Signal contact (71/72)
Output Description2 parallel, non-safety-oriented, potential-free NCs
Number of outputs1
Contact Switching Type1 signal output contact
Contact materialAgSnO2
Switchable voltageMin. 5 V AC/DC
max. 250 V AC/DC
Switchable powerMin. 50 mW
Instantaneous currentMin. 10 mA
max. 6 A
Breaking capacity IEC 60947-5-11.5 A (AC15)
5 A (DC13)
Permanent Load Current6 A
arit. Total current36 A2
Switching frequencymax. 1 Hz
Mechanical life10x 106Manoeuvring cycles
Output fuse6 A (gL/gG)
Relay: Feedback Loop (11/12)
Output DescriptionDiagnostic Contact, 2 NC in Series, Potential Free
Number of outputs1
Contact Switching Type1 feedback loop
Contact materialAgSnO2
Switchable voltagemax. 250 V AC/DC
Min. 10 V
Switchable powerMin. 100 mW
Instantaneous currentmax. 6 A
Breaking capacity IEC 60947-5-11.5 A (AC15)
3 A (DC13)
Permanent Load Current6 A
arit. Total current36 A2
Switching frequencymax. 0.5 Hz
Output fuse10 A (gL/gG)

Connection data
Connection technology
plug-inYes
Conductor connection
LinkScrew connection
Rigid conductor cross-section0.2 mm² ... 2.5 mm²
Flexible conductor cross-section0.2 mm² ... 2.5 mm²
AWG conductor cross-section24 ... 12
Stripping length7 mm
ThreadM3
Tightening torque0.5 Nm ... 0.6 Nm

Signalling
Operating voltage indication1 x Green LEDs

dimensions
width22.5 mm
height99 mm
Depth114.5 mm

Material information
Housing MaterialPolyamide

Features
Technical safety data
Stop category0
Technical safety data: EN ISO 13849
Category4 (in combination with a suitable measuring device)
Performance Level (PL)and (in combination with a suitable measuring device)
Technical safety data: IEC 61508 - High-Demand
Safety Integrity Level (SIL)3 (in combination with a suitable measuring device)
Technical safety data: IEC 61508 - Low-Demand
Safety Integrity Level (SIL)3 (in combination with a suitable measuring device)
Technical safety data: EN IEC 62061
Safety Integrity Level (SIL)3 (in combination with a suitable measuring device)

Environmental and electrical life conditions
Environmental conditions
Degree of protectionIp20
Degree of protection Installation location min.IP54
Ambient temperature (operating)-20 °C ... 55 °C (take into account derating)
Ambient temperature (storage/transport)-40 °C ... 70 °C
heightmax. 2000 m (on NN)
Max. humidity. Permitted (storage/transport)75 %
Maximum permissible humidity (operation)75 %
Shock15g
Vibration (operation)10 Hz ... 150 Hz, 0.15 mm amplitude, 2g

Approvals
Ec
MarkingCE Compliance

Regulations and requirements
Air and surface distances between circuits
Standards/ProvisionsEN 60947-1

Montage
Mounting typeRail Mounting
Installation instructionsSee Derating curve
Installation LocationVertical or horizontal
LinkScrew connection

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.