View larger
PT 2X1VA-230AC-ST 2839198 PHOENIX CONTACT Surge protection plug
PT 2X1VA-230AC-ST
2839198
PHOENIX CONTACT
1 Pcs.
Automation > Surge protection device for data networks/MCR-technology
Trabtech (TT)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Engineered for electrical safety, the Phoenix Contact PT 2X1VA-230AC-ST surge protection plug safely channels destructive voltage spikes away from sensitive instrumentation circuits. These pluggable safety modules are widely used in industrial process control to prevent sudden equipment failures. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Nominal voltage DC (EF008799): 230 V
More info
▲Key Commercial Data
| Orderkey | 2839198 |
|---|---|
| Packing unit | 10 pc |
| Catalog page | Page 114 (C-4-2017) |
| GTIN | 4017918182854 |
| Weight per Piece (excluding packing) | 24.230 g |
| Custom tariff number | 85363010 |
| Country of origin | DE (Germany) |
Dimensions
| Height | 44.8 mm |
|---|---|
| Width | 17.5 mm |
| Depth | 51.7 mm |
| Horizontal pitch | 1 Div. |
| Complete module height | 90 mm |
| Complete module width | 17.7 mm |
| Complete module depth | 65.5 mm |
Ambient conditions
| Ambient temperature (operation) | -40 °C ... 85 °C |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | ≤ 2000 m (amsl (above mean sea level)) |
| Degree of protection | IP20 |
General
| Housing material | PA 6.6 |
|---|---|
| Flammability rating according to UL 94 | V-0 |
| Color | jet black RAL 9005 |
| Mounting type | on base element |
| Type | Male |
| Direction of action | Line-Line & Line-Earth Ground |
| Arrester can be tested with CHECKMASTER from software version: | From SW rev. 1.00 |
Additional descriptions
| Note | Technical data is valid in association with the following specified base elements: |
|---|---|
| PT -BE/ FM 2839282 |
Protective circuit
| IEC test classification | C1 |
|---|---|
| C2 | |
| C3 | |
| D1 | |
| Nominal voltage UN | 230 V AC (50/60 Hz) |
| Maximum continuous voltage UC | 275 V DC |
| 275 V AC (50/60 Hz) | |
| Rated current | 26 A AC (30 °C) |
| 1 A DC (82 °C) | |
| Operating effective current ICat UC | ≤ 1.5 mA AC |
| ≤ 2 mA DC | |
| Residual current IPE | ≤ 3 mA AC |
| ≤ 4 mA DC | |
| Nominal discharge current In(8/20) µs (line-earth) | 2.5 kA |
| Pulse discharge current Iimp(10/350) µs | 500 A |
| Total discharge current Itotal(8/20) µs | 5 kA |
| Output voltage limitation at 1 kV/µs (line-earth) spike | ≤ 650 V |
| Output voltage limitation at 1 kV/µs (line-earth) static | ≤ 650 V |
| Voltage protection level Up(line-earth) | ≤ 750 V (C1 - 1.4 kV / 0.7 kA) |
| ≤ 900 V (C2 - 5 kV/2,5 kA) | |
| ≤ 750 V (C3 - 100 A) | |
| Response time tA(line-earth) | ≤ 25 ns |
| Input attenuation aE, asym. | typ. 0.3 dB (≤ 650 kHz / 150 Ω) |
| Cut-off frequency fg (3 dB), asym. (GND) in 150 Ohm system | typ. 2.2 MHz |
| Capacity (line-earth) | typ. 1 nF |
| Surge protection fault message | none |
| Max. required back-up fuse | 25 A AC (gL/gG) |
| 1 A DC (T) | |
| Impulse durability (line-earth) | C1 - 1,4 kV / 0,7 kA |
| C2 - 5 kV/2.5 kA | |
| C3 - 100 A | |
| D1 - 500 A |
Connection data
| Connection method | Screw connection (in connection with the base element) |
|---|---|
| Screw thread | M3 |
| Tightening torque | 0.5 Nm |
| Stripping length | 8 mm |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section solid | 0.2 mm² ... 4 mm² |
| Conductor cross section AWG | 24 ... 12 |
Standards and Regulations
| Standards/specifications | IEC 61643 2000 + corrigendum 2001 + A1:2008, modified + A2:2012 |
|---|---|
| EN 61643-21 2001 + A1:2009 + A2:2013 |