PHOENIX CONTACT RIF-2-RPT-LV-24AC/4X21 RIF-2-RPT-LV-24AC/4X21 2903306 PHOENIX CONTACT Relay Module View larger
Images are for illustrative purposes only. Please refer to data sheet for details

RIF-2-RPT-LV-24AC/4X21 2903306 PHOENIX CONTACT Relay Module

RIF-2-RPT-LV-24AC/4X21

2903306

PHOENIX CONTACT

10 Pcs.

Relay Module Pre-assembled relay module with push-in connection, consisting of: relay socket, relay with power contact, plug-in indication/antiparasitic module and clamping flange. Contact type: 4 investor contacts. Input voltage: 24 V AC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

The RIF-2-RPT-LV-24AC/4X21 2903306 PHOENIX CONTACT Relay Module is an electromechanical switching device used to isolate control circuits from load circuits in complex automation setups. Panel builders rely on standard relay modules to safely manage high-current loads using low-voltage control signals from PLCs.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Complete with socket (EF003359): Yes
  • With detachable clamps (EF003340): No
  • With LED indication (EF005950): Yes
  • Rated control supply voltage AC 50 Hz (EF003978): 19.2 V
  • Rated control supply voltage AC 60 Hz (EF003979): 19.2 V
  • Voltage type for actuating (EF008242): AC
  • Drive, polarization (EF003355): Polarized
  • Drive, switching attitude (EF003356): Mono stable
  • Number of contacts as normally closed contact (EF008255): 0
  • Number of contacts as normally open contact (EF008256): 0
  • Number of contacts as change-over contact (EF008257): 4
  • Type of switch contact (EF003358): Single contact
  • With forced-guided contacts (EF003357): No
  • Material of contact surface (EF004020): Untreated
  • Nominal current (EF000001): 0.066 A
  • Degree of protection (IP) (EF005474): IP20

More info

▲

Key Commercial Data

Orderkey2903306
Packing unit10 pc
Catalog pagePage 351 (C-5-2017)
GTIN4046356732147
Weight per Piece (excluding packing)108.500 g
Custom tariff number85364110
Country of originDE (Germany)

Note

Utilization restrictionEMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width31 mm
Height96 mm
Depth75 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 50 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN24 V AC
Input voltage range in reference to UNsee diagram
Mains frequency50/60 Hz
Typical input current at UN66 mA
Typical response time5 ms ... 15 ms
Typical release time range5 ms ... 20 ms
Coil voltage24 V AC
Protective circuitVaristor
Operating voltage displayYellow LED
Power dissipation for nominal condition1.58 W

Contact side

Contact type4 PDTs
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V (At 24 mA)
Min. switching current5 mA (at 24 V)
Maximum inrush current16 A (20 ms, N/O contact)
Limiting continuous current5 A (see diagram)
Interrupting rating (ohmic load) max.120 W (at 24 V DC)
124 W (at 48 V DC)
108 W (at 60 V DC)
52 W (at 110 V DC)
48 W (at 220 V DC)
1250 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)
0.22 A (at 120 V, DC13)
0.11 A (at 250 V, DC13)
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1 A (at 240 V, AC15)

Connection data 1

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG26 ... 16 (solid)
26 ... 16 (flexible)

Connection data 2

Connection nameContact side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 1.5 mm²
Conductor cross section flexible0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
Conductor cross section AWG26 ... 16 (solid)
26 ... 16 (flexible)

General

Test voltage relay winding/relay contact2.5 kVrms(50 Hz, 1 min.)
Test voltage relay contact/relay contact2 kVrms(50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionIP20 (Relay base)
RT I (Relay)
Mechanical service lifeapprox. 2x 107cycles
Mounting positionany
Assembly instructionsIn rows with zero spacing
Net weight (SAP)108.5 g

Standards and Regulations

Connection in acc. with standardCSA
Standards/regulationsDIN EN 50178
Rated insulation voltage250 V AC
Rated surge voltage2.5 kV
InsulationBasic insulation
Degree of pollution2
Overvoltage categoryII
Flammability rating according to UL 94V2

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Articles in set

Classifications


Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.