View larger
RIF-2-RPT-LV-230AC/2X21 2903310 PHOENIX CONTACT Pre-assembled relay module with push-in connection, consisti..
RIF-2-RPT-LV-230AC/2X21
2903310
PHOENIX CONTACT
10 Pcs.
Automation > Switching relay
Industrial Relays
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact RIF-2-RPT-LV-230AC/2X21 2903310 is a pre-assembled relay module with push-in connection, functioning as an interface element for electrical isolation and signal switching in control technology. These assemblies streamline panel wiring while protecting downstream electronics.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Width: 31 mm
- Height: 96 mm
- Depth: 75 mm
- Ambient temperature (operation): -40 °C ... 50 °C
- Ambient temperature (storage/transport): -40 °C ... 85 °C
- Nominal input voltage U N: 230 V AC
- Input voltage range in reference to U N: see diagram
- Mains frequency: 50 Hz
- Typical input current at U N: 6.5 mA
- Typical response time: 5 ms ... 15 ms
- Typical release time range: 5 ms ... 20 ms
- Coil voltage: 230 V AC
- Protective circuit: Varistor
- Operating voltage display: Yellow LED
- Contact type: 2 PDT
- Contact material: AgNi
More info
▲Dimensions
| Width | 31 mm |
|---|---|
| Height | 96 mm |
| Depth | 75 mm |
Ambient conditions
| Ambient temperature (operation) | -40 °C ... 50 °C |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Coil side
| Nominal input voltage UN | 230 V AC |
|---|---|
| Input voltage range in reference to UN | see diagram |
| Mains frequency | 50 Hz |
| 60 Hz | |
| Typical input current at UN | 6.5 mA |
| Typical response time | 5 ms ... 15 ms |
| Typical release time range | 5 ms ... 20 ms |
| Coil voltage | 230 V AC |
| Protective circuit | Varistor |
| Operating voltage display | Yellow LED |
Contact side
| Contact type | 2 PDT |
|---|---|
| Contact material | AgNi |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 5 V (At 24 mA) |
| Min. switching current | 5 mA (at 24 V) |
| Maximum inrush current | 30 A (20 ms, N/O contact) |
| Limiting continuous current | 8.5 A (see diagram) |
| Interrupting rating (ohmic load) max. | 204 W (at 24 V DC) |
| 124 W (at 48 V DC) | |
| 108 W (at 60 V DC) | |
| 52 W (at 110 V DC) | |
| 48 W (at 220 V DC) | |
| 2125 VA (for 250 V AC) | |
| Switching capacity in acc. with DIN VDE 0660/IEC 60947 | 2 A (at 24 V, DC13) |
| 0.22 A (at 120 V, DC13) | |
| 0.11 A (at 250 V, DC13) | |
| 3 A (at 120 V, AC15) | |
| 1.5 A (at 240 V, AC15) |
Connection data input side
| Connection name | Coil side |
|---|---|
| Connection method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section solid | 0.14 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) | |
| 0.14 mm² ... 1.5 mm² (Ferrules without plastic sleeve) | |
| Conductor cross section AWG | 26 ... 16 |
General
| Test voltage relay winding/relay contact | 2.5 kVrms(50 Hz, 1 min.) |
|---|---|
| Test voltage relay contact/relay contact | 2.5 kVrms(50 Hz, 1 min.) |
| Operating mode | 100% operating factor |
| Degree of protection | IP20 (Relay socket) |
| RT I (Relay) | |
| Mechanical service life | Approx. 2 x 107cycles |
| Standards/regulations | DIN EN 50178 |
| IEC 62103 | |
| Rated insulation voltage | 250 V AC |
| Pollution degree | 2 |
| Overvoltage category | III |
| Mounting position | any |
| Assembly instructions | In rows with zero spacing |