PHOENIX CONTACT REL-MR-4,5DC/21 REL-MR- 4,5DC/21 2961367 PHOENIX CONTACT Single relay View larger
Images are for illustrative purposes only. Please refer to data sheet for details

REL-MR- 4,5DC/21 2961367 PHOENIX CONTACT Single relay

REL-MR-4,5DC/21

2961367

PHOENIX CONTACT

10 Pcs.

Single relay Plug-in miniature power relay, with power contact, 1 switched contact, input voltage 4.5 V DC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

A Phoenix Contact REL-MR-4,5DC/21 single relay is a compact electromechanical switching component designed for integration into printed circuit boards and dense sub-assemblies. Such miniature relays enable precise low-voltage signal routing and control operations within confined electronic enclosures.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product type: Single relay
  • Operating mode: 100% operating factor
  • Mechanical service life: 2x 10 7 cycles
  • Data management status Date of last data management: 02.05.2024
  • Article revision: 02
  • Insulation characteristics Overvoltage category: III
  • Pollution degree: 3
  • Maximum power dissipation for nominal condition: 0.17 W
  • Test voltage (Winding/contact): 4 kV AC (50 Hz, 1 min., winding/contact)
  • Coil side Nominal input voltage U N: 4.5 V DC
  • Input voltage range: 2.7 V DC ... 12.4 V DC
  • Input voltage range in reference to U N: see diagram
  • Drive and function: monostable
  • Drive (polarity): non-polarized
  • Typical input current at U N: 38 mA
  • Typical response time: 5 ms

More info

▲
Technical data

Product properties
Product typeSingle relay
Operating mode100% operating factor
Mechanical service life2x 107cycles
Data management status
Date of last data management02.05.2024
Article revision02
Insulation characteristics
Overvoltage categoryIII
Pollution degree3

Electrical properties
Maximum power dissipation for nominal condition0.17 W
Test voltage (Winding/contact)4 kV AC (50 Hz, 1 min., winding/contact)

Input data
Coil side
Nominal input voltage UN4.5 V DC
Input voltage range2.7 V DC ... 12.4 V DC
Input voltage range in reference to UNsee diagram
Drive and functionmonostable
Drive (polarity)non-polarized
Typical input current at UN38 mA
Typical response time5 ms
Typical release time2.5 ms
Coil resistance119 Ω ±10 % (at 20 °C)

Output data
Switching
Contact switching type1 changeover contact
Type of switch contactSingle contact
Contact materialAgSnO
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V (at 100 mA)
Limiting continuous current6 A
Maximum inrush current10 A (4 s)
Min. switching current10 mA (at 12 V)
Interrupting rating (ohmic load) max.140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.1 A (at 220 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
Motor load according to UL 5081/4 HP, 240 - 277 V AC (N/O contact)
1/6 HP, 240 - 277 V AC (N/C contact)

Connection data
Connection methodPlug / solder connection

Dimensions
Dimensional drawing
Width5 mm
Height28 mm
Depth15 mm

Material specifications
Colorwhite (RAL 9010)

Environmental and real-life conditions
Ambient conditions
Degree of protectionRT III
Ambient temperature (operation)-40 °C ... 85 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Approvals
Corrosive gas test
IdentificationISA-S71.04. G3 Harsh Group
EN 60068-2-60

Standards and regulations
Standards/regulationsIEC 60664
EN 50178
EN 61810-1

Mounting
Assembly notein rows with zero spacing
Mounting positionany

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.