View larger
SACC-SQ-M12MSB-5CON-20-L180 1456459 PHOENIX CONTACT Flush-type connector
SACC-SQ-M12MSB-5CON-20-L180
1456459
PHOENIX CONTACT
10 Pcs.
Connectors > Circular connector, mounting (PCB)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact flush-type connectors offer reliable connection interfaces for internal device wiring and control panel sub-assemblies. They establish stable signal pathways within enclosed electrical equipment where robust exterior sealing is not required.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Number of data contacts (EF012232): 0
- Number of power contacts (EF012216): 0
- Number of control contacts (EF012217): 5
- Type of housing (EF006980): Straight
- Rated current In (EF008250): 4 A
- Ambient temperature (EF002386): -25 °C
- Rated voltage (EF000228): 60 V
- Over voltage category (EF006785): II
- Pollution degree (EF006786): 3
- Material of contact surface (EF004020): Gold
- Housing material (EF001596): Plastic
- With protective conductor (EF007468): No
- Degree of protection (IP), mounted (EF007466): IP20
- Min. number of insertion cycles (EF012212): 100
- Screened (EF000881): No
- With status indication (EF001602): No
More info
▲Key Commercial Data
| Orderkey | 1456459 |
|---|---|
| Packing unit | 10 pc |
| Minimum order quantity | 10 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 240 (C-2-2013) |
| GTIN | 4046356617062 |
| Weight per Piece (excluding packing) | 11.340 g |
| Custom tariff number | 85366990 |
| Country of origin | DE (Germany) |
Ambient conditions
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
|---|---|
| -40 °C ... 85 °C (without mechanical actuation) | |
| Degree of protection | IP20 |
General
| Note | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
|---|---|
| Rated current at 40°C | 4 A |
| Rated voltage | 60 V |
| Rated surge voltage | 1.5 kV |
| Number of positions | 5 |
| Insulation resistance | ≥ 100 MΩ |
| Coding | B - inverse |
| Standards/regulations | M12 connector IEC 61076-2-101 |
| Signal type/category | Universal |
| Status display | No |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Connection method | Solder pins |
| Insertion/withdrawal cycles | > 100 |
| Torque | 3 Nm ... 4 Nm (Installation-side) |
| Mounting type | Front mounting Square flange 20 mm side length |
Material
| Flammability rating according to UL 94 | V0 |
|---|---|
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PA 6.6 |
| Material, knurls | Zinc die-cast, nickel-plated |
| Sealing material | FKM |
Cable
| Conductor cross section | 0.34 mm² |
|---|---|
| Conductor structure signal line | 7x 0.25 mm |
| Core diameter including insulation | 1.2 mm ±0.07 mm |
| Thickness, insulation | 0.21 mm |
| Standards/specifications | M12 connector IEC 61076-2-101 |
| Insulation resistance | ≥ 20 MΩ*km |
| Conductor resistance | ≤ 57.6 mΩ/m |
| Nominal voltage, cable | 300 V |
| Test voltage, cable | 2000 V AC |
| Ambient temperature (operation) | -40 °C ... 85 °C (cable, fixed installation) |
| -25 °C ... 85 °C (cable, flexible installation) |
Standards and Regulations
| Standard designation | M12 connector |
|---|---|
| Standards/regulations | IEC 61076-2-101 |
| Flammability rating according to UL 94 | V0 |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |