View larger
SACC-MS-5CON-PG11-DUO-M SCO 1543016 PHOENIX CONTACT Connector
SACC-MS-5CON-PG11-DUO-M SCO
1543016
PHOENIX CONTACT
1 Pcs.
Connectors > Sensor-actuator connector
QUICKON Installation System (QPD)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact SACC-MS-5CON-PG11-DUO-M SCO is a field-attachable circular connector designed to facilitate secure, custom cable wiring in industrial sensor and control networks. Installers use these modular connectors to maintain robust signal integrity and environmental sealing in harsh automation environments. Pricing, availability, and lead time are confirmed per enquiry through an RFQ.
- Assembly note: This connector includes one seal for small and one seal for large outer cable diameters.
- Product type: Circular connector (cable-side)
- Sensor type: Universal
- Number of positions: 5
- No. of cable outlets: 2
- Shielded: no
- Coding: A
- Cable outlet: straight
- Pg screw connection: Pg11
- Insulation characteristics Overvoltage category: II
- Degree of pollution: 3
- Length: 63 mm
- External dimensions Outside diameter: 2x 2.1 mm ... 3 mm (when using the seal for small outer cable diameters)
- Housing Diameter housing: 20 mm
- Seal material: NBR
- Material of grip body: PA
More info
▲| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Assembly note | This connector includes one seal for small and one seal for large outer cable diameters. |
| Product type | Circular connector (cable-side) |
| Sensor type | Universal |
| Number of positions | 5 |
| No. of cable outlets | 2 |
| Shielded | no |
| Coding | A |
| Cable outlet | straight |
| Pg screw connection | Pg11 |
| Insulation characteristics | |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Length | 63 mm |
| External dimensions | |
| Outside diameter | 2x 2.1 mm ... 3 mm (when using the seal for small outer cable diameters) |
| 2x 4 mm ... 5.2 mm (when using the seal for large outer cable diameters) | |
| Housing | |
| Diameter housing | 20 mm |
| Seal material | NBR |
| Material of grip body | PA |
| Contact material | CuZn |
| Contact surface material | CuSnZn |
| Contact carrier material | PA |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Conductor connection | |
| Connection method | Screw connection |
| Connection cross section | 0.25 mm² ... 0.75 mm² (without ferrule) |
| 0.14 mm² ... 0.75 mm² (with ferrule) | |
| 0.25 mm² ... 0.75 mm² (solid) | |
| Connection cross section AWG | 24 ... 18 (without ferrule) |
| 26 ... 20 (with ferrule) | |
| Stripping length of the individual wire | 5 mm |
| Tightening torque | 0.4 Nm (M12 knurl) |
| 0.2 Nm (Screw terminal blocks) | |
| 0.8 Nm ... 1 Nm (Pressure screw with sleeve housing) | |
| Rated surge voltage | 1.5 kV |
| Contact resistance | ≤ 8 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 48 V AC |
| 60 V DC | |
| Nominal current IN | 4 A |
| Mechanical data | |
| Insertion/withdrawal cycles | ≥ 100 |
| Connection 1 | |
| Head design | Plug |
| Head cable outlet | straight |
| Head thread type | M12 |
| Head locking type | SPEEDCON |
| Coding | A |
| Signal type/category | Universal |
| Stripping length of the individual wire | 5 mm |
| Ambient conditions | |
| Degree of protection | IP67 |
| Ambient temperature (operation) | -40 °C ... 85 °C (Plug / socket) |
| M12 | |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |