View larger
SACC-DSI-MSD-4CON-M12-SCO SH 1552984 PHOENIX CONTACT Bus system flat-type plug
SACC-DSI-MSD-4CON-M12-SCO SH
1552984
PHOENIX CONTACT
20 Pcs.
Connectors > Circular connector, mounting (PCB)
Field Device Connectors (FDC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact SACC-DSI-MSD-4CON-M12-SCO SH 1552984 PHOENIX CONTACT Bus system flat-type plug facilitates protected data and signal routing through equipment bulkheads. These circular connectors provide reliable mating interfaces for industrial networks, ensuring uninterrupted communication between field devices and central control hardware.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Order information:: Lock nut is included in the scope of delivery
- General: Contact connection method: Crimp connection
- Mounting type: Rear mounting M12 x 1 With locking nut
- Assembly note: With locking nut
- Product type: Circular connectors (device side)
- Number of positions: 4
- Shielded: yes
- Coding: D
- Thread type: M12
- Data management status Article revision: 07
- Insulation characteristics Overvoltage category: II
- Degree of pollution: 3
- Flammability rating according to UL 94: V0
- Seal material: NBR
- Contact material: CuZn
- Contact surface material: Au
More info
▲| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Order information: | Lock nut is included in the scope of delivery |
| General | Contact connection method: Crimp connection |
| Mounting type | Rear mounting M12 x 1 With locking nut |
| Assembly note | With locking nut |
| Product type | Circular connectors (device side) |
| Number of positions | 4 |
| Shielded | yes |
| Coding | D |
| Thread type | M12 |
| Data management status | |
| Article revision | 07 |
| Insulation characteristics | |
| Overvoltage category | II |
| Degree of pollution | 3 |
| Flammability rating according to UL 94 | V0 |
| Seal material | NBR |
| Contact material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PA 6.6 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Rated surge voltage | 2.5 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 250 V |
| Nominal current IN | 4 A |
| Conductor connection | |
| Connection method | Solder pins |
| Contact connection type | Pin |
| Tightening torque | 3 Nm ... 4 Nm (Installation-side) |
| Mechanical data | |
| Insertion/withdrawal cycles | > 100 |
| Connection 1 | |
| Head design | Pin |
| Head cable outlet | straight |
| Head thread type | M12 |
| Head locking type | SPEEDCON |
| Coding | D |
| Ambient temperature (operation) | -40 °C ... 85 °C (cable, fixed installation) |
| -25 °C ... 85 °C (Cable, flexible installation) |
| Ambient conditions | |
| Degree of protection | IP67 (When plugged in) |
| IP65 (When plugged in) | |
| IP65/IP67 | |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| -40 °C ... 85 °C (without mechanical actuation) | |
| -25 °C ... 85 °C (Cable, flexible installation) | |
| -40 °C ... 85 °C (cable, fixed installation) | |
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |