View larger
OPT-24DC/230AC/ 1 2967950 PHOENIX CONTACT Miniature solid-state relay
OPT-24DC/230AC/ 1
2967950
PHOENIX CONTACT
10 Pcs.
Automation > Optocoupler
Industrial Relays
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Employing semiconductor switching technology, the OPT-24DC/230AC/ 1 2967950 PHOENIX CONTACT Miniature solid-state relay from Phoenix Contact provides silent, bounce-free switching for control signals. Miniature relays of this type are widely integrated into compact interface modules to manage frequent switching cycles without mechanical wear. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Product type: Single solid-state relay
- Operating mode: 100% operating factor
- Data management status Date of last data management: 11.07.2024
- Article revision: 02
- Insulation characteristics: Standards/regulations Insulation: Basic insulation
- Overvoltage category: III
- Pollution degree: 2
- Maximum power dissipation for nominal condition: 0.07 W
- Test voltage (Input/output): 2.5 kV (50 Hz, 1 min., input/output)
- Nominal input voltage U N: 24 V DC
- Input voltage range in reference to U N: 0.8 ... 1.2
- Input voltage range: 19.2 V DC ... 28.8 V DC
- Switching threshold "0" signal in reference to U N: 0.35
- Switching threshold "1" signal in reference to U N: 0.8
- Typical input current at U N: 6.6 mA
- Typical response time: 10 ms (at U N )
More info
▲| Product type | Single solid-state relay |
| Operating mode | 100% operating factor |
| Data management status | |
| Date of last data management | 11.07.2024 |
| Article revision | 02 |
| Insulation characteristics: Standards/regulations | |
| Insulation | Basic insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
| Maximum power dissipation for nominal condition | 0.07 W |
| Test voltage (Input/output) | 2.5 kV (50 Hz, 1 min., input/output) |
| Nominal input voltage UN | 24 V DC |
| Input voltage range in reference to UN | 0.8 ... 1.2 |
| Input voltage range | 19.2 V DC ... 28.8 V DC |
| Switching threshold "0" signal in reference to UN | 0.35 |
| Switching threshold "1" signal in reference to UN | 0.8 |
| Typical input current at UN | 6.6 mA |
| Typical response time | 10 ms (at UN) |
| Typical turn-off time | 10 ms (at UN) |
| Transmission frequency | 10 Hz |
| Contact switching type | 1 N/O contact |
| Design of digital output | electronic |
| Output voltage range | 24 V AC ... 253 V AC |
| Limiting continuous current | 0.75 A (see derating curve) |
| Maximum inrush current | 30 A (10 ms) |
| Min. load current | 10 mA |
| Leakage current | < 1 mA |
| Phase angle cos phi min | 0.5 |
| Max. load value | 4.5 A2s |
| Voltage drop at max. limiting continuous current | < 1 V |
| Output circuit | 2-conductor floating, zero voltage switch |
| Protective circuit | RCV circuit; RCV circuit |
| Dimensional drawing | |
| Width | 5 mm |
| Height | 28 mm |
| Depth | 15 mm |
| Color | black (RAL 9005) |
| Ambient conditions | |
| Degree of protection | RT III |
| Ambient temperature (operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
| Corrosive gas test | |
| Identification | ISA-S71.04. G3 Harsh Group |
| EN 60068-2-60 | |
| Standards/regulations | |
| Standards/regulations | IEC 60664 |
| EN 50178 | |
| Assembly note | in rows with zero spacing |
| Mounting position | any |