PHOENIX CONTACT PLC-RSC-120UC/21-21AU PLC-RSC-120UC/21-21AU 2967138 PHOENIX CONTACT Relay Module View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PLC-RSC-120UC/21-21AU 2967138 PHOENIX CONTACT Relay Module

PLC-RSC-120UC/21-21AU

2967138

PHOENIX CONTACT

1 Pcs.

Relay Module PLC-INTERFACE, consisting of PLC-BSC.../21 base terminal block with screw connection and plug-in miniature relay with multilayer gold contact, for mounting on NS 35/7.5 rail, 2 switched contacts, input voltage 120 V AC/110 V DC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact PLC-RSC-120UC/21-21AU 2967138 PHOENIX CONTACT Relay Module is an interface component built to facilitate universal signal switching in automated control systems. Industrial engineers rely on these modules to bridge low-level controller outputs with higher-voltage plant equipment while ensuring reliable galvanic isolation. Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Product type: Relay Module
  • Product family: PLC-INTERFACE
  • Application: Universal
  • Operating mode: 100% operating factor
  • Mechanical service life: 3x 10 7 cycles
  • Data management status Date of last data management: 01.08.2024
  • Article revision: 12
  • Insulation characteristics Insulation: Basic insulation
  • Overvoltage category: III
  • Pollution degree: 3
  • Maximum power dissipation for nominal condition: 0.54 W
  • Test voltage (Winding/contact): 4 kV AC (50 Hz, 1 min., winding/contact)
  • Test voltage (Changeover contact/changeover contact): 2.5 kV AC (50 Hz, 1 min., changeover contact/changeover contact)
  • Rated surge voltage: 6 kV
  • Coil side Nominal input voltage U N: 120 V AC
  • Input voltage range: 102 V AC ... 168 V AC (20 °C)

More info

▲
Technical data

Product properties
Product typeRelay Module
Product familyPLC-INTERFACE
ApplicationUniversal
Operating mode100% operating factor
Mechanical service life3x 107cycles
Data management status
Date of last data management01.08.2024
Article revision12
Insulation characteristics
InsulationBasic insulation
Overvoltage categoryIII
Pollution degree3

Electrical properties
Maximum power dissipation for nominal condition0.54 W
Test voltage (Winding/contact)4 kV AC (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)2.5 kV AC (50 Hz, 1 min., changeover contact/changeover contact)
Rated surge voltage6 kV

Input data
Coil side
Nominal input voltage UN120 V AC
110 V DC
Input voltage range102 V AC ... 168 V AC (20 °C)
85.8 V DC ... 154 V DC (20 °C)
Nominal voltage (plugged-in electromechanical relay)110 V DC
Drive and functionmonostable
Drive (polarity)polarized
Typical input current at UN4.5 mA (at UN= 120 V AC)
4.2 mA (at UN= 110 V DC)
Typical response time7 ms
Typical release time10 ms
Protective circuitBridge rectifier; Bridge rectifier
Operating voltage displayYellow LED

Output data
Switching
Contact switching type2 changeover contacts
Type of switch contactSingle contact
Contact materialAgNi, hard gold-plated
Maximum switching voltage30 V AC
36 V DC
Minimum switching voltage100 mV (10 mA)
Limiting continuous current50 mA
Maximum inrush current50 mA
Min. switching current1 mA (24 V)
Interrupting rating (ohmic load) max.1.2 W (at 24 V DC)
Switching: when the gold layer is destroyed
Notethe following values are applicable if a gold layer is destroyed
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V AC/DC
Limiting continuous current6 A
Maximum inrush current15 A (300 ms)
Min. switching current10 mA
Interrupting rating (ohmic load) max.140 W (at 24 V DC)
85 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
60 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
2 A (at 24 V, AC15)
2 A (at 120 V, AC15)
2 A (at 250 V, AC15)

Connection data
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG26 ... 14
Tightening torque0.6 Nm ... 0.8 Nm

Dimensions
Width14 mm
Height80 mm
Depth94 mm

Material specifications
Colorgray (RAL 7042)
Flammability rating according to UL 94V0 (Housing)

Environmental and real-life conditions
Ambient conditions
Degree of protection (Relay)RT III (Relay)
Degree of protection (Relay base)IP20 (Relay base)
Ambient temperature (operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Approvals
CE
CertificateCE-compliant
UKCA
CertificateUKCA-compliant
Shipbuilding approval
CertificateTAE0000196
Corrosive gas test
IdentificationISA-S71.04. G3 Harsh Group
EN 60068-2-60
DNV GL data
TemperatureD
HumidityA
VibrationB/C
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board

EMC data
Electromagnetic compatibilityConformance with EMC directive
Low Voltage DirectiveConformance with Low Voltage Directive

Standards and regulations
Standards/regulationsIEC 60947-5-1

Mounting
Mounting typeDIN rail mounting
Assembly notein rows with zero spacing
Mounting positionany

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.