View larger
PLC-RPT- 24UC/ 1/S/H 2900328 PHOENIX CONTACT PLC-INTERFACE with switch (operation by hand) and integrated po..
PLC-RPT-24UC/ 1/S/H
2900328
PHOENIX CONTACT
1 Pcs.
Automation > Switching relay
Industrial Relays
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Phoenix Contact PLC-RPT-24UC/ 1/S/H is a PLC-INTERFACE with switch (operation by hand) and integrated po.. utilized in modern industrial control panels for manual override capabilities and signal routing. Interface modules bridge control logic with high-power field actuators efficiently.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Width: 6.2 mm
- Height: 80 mm
- Depth: 90 mm
- Ambient temperature (operation): -20 °C ... 60 °C
- Ambient temperature (storage/transport): -40 °C ... 85 °C
- Nominal input voltage U N: 24 V AC/DC
- Input voltage range in reference to U N: see diagram
- Typical input current at U N: 11 mA
- Typical response time: 6 ms
- Typical release time: 15 ms
- Protective circuit: Bridge rectifier Bridge rectifier
- Operating voltage display: Yellow LED
- Power dissipation for nominal condition: 0.26 W
- Contact type: 1 N/O contact with switch
- Contact material: AgSnO
- Maximum switching voltage: 250 V AC/DC
More info
▲Dimensions
| Width | 6.2 mm |
|---|---|
| Height | 80 mm |
| Depth | 90 mm |
Ambient conditions
| Ambient temperature (operation) | -20 °C ... 60 °C |
|---|---|
| Ambient temperature (storage/transport) | -20 °C ... 85 °C |
Coil side
| Nominal input voltage UN | 24 V AC/DC |
|---|---|
| Input voltage range in reference to UN | see diagram |
| Typical input current at UN | 11 mA |
| Typical response time | 6 ms |
| Typical release time | 15 ms |
| Protective circuit | Bridge rectifier Bridge rectifier |
| Operating voltage display | Yellow LED |
| Power dissipation for nominal condition | 0.26 W |
Contact side
| Contact type | 1 N/O contact with switch |
|---|---|
| Contact material | AgSnO |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 5 V (at 100 mA) |
| Min. switching current | 10 mA (at 12 V) |
| Maximum inrush current | on request |
| Limiting continuous current | 6 A |
| Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
| 20 W (at 48 V DC) | |
| 18 W (at 60 V DC) | |
| 23 W (at 110 V DC) | |
| 40 W (at 220 V DC) | |
| 1500 VA (for 250 V AC) |
General
| Operating mode | 100% operating factor |
|---|---|
| Flammability rating according to UL 94 | V0 |
| Designation | Air clearances and creepage distances between the power circuits |
| Standards/regulations | IEC 60664 |
| EN 50178 | |
| IEC 62103 | |
| Rated surge voltage/insulation | 6 kV |
| Rated insulation voltage | 250 V AC |
| Pollution degree | 2 |
| Overvoltage category | III |
| Mounting position | any |
| Assembly instructions | In rows with zero spacing |
Connection data input side
| Connection name | Input side |
|---|---|
| Connection method | Push-in connection |
| Stripping length | 8 mm |
| Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 26 ... 14 |