PHOENIX CONTACT PLC-RPT-60DC/21-21 PLC-RPT- 60DC/21-21 2900334 PHOENIX CONTACT PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal blo.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PLC-RPT- 60DC/21-21 2900334 PHOENIX CONTACT PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal blo..

PLC-RPT-60DC/21-21

2900334

PHOENIX CONTACT

10 Pcs.

PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rail, 2 PDTs, input voltage 60 V DC PLC-INTERFACE, consists of a PLC-BPT.../21-21 base terminal block with push-in connection and plug-in miniature relay with power contact, for installation on symmetrical rail NS 35/7.5, 2 inverter contacts, input voltage 60 V DC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

A PLC-INTERFACE basic terminal block by Phoenix Contact, part number PLC-RPT-60DC/21-21, functions as a modular switching component designed for industrial control panels. Relay modules of this type provide electrical isolation and signal amplification between sensitive controller outputs and high-power field devices.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Complete with socket (EF003359): Yes
  • With detachable clamps (EF003340): No
  • With LED indication (EF005950): Yes
  • Rated control supply voltage DC (EF003980): 51 V
  • Voltage type for actuating (EF008242): DC
  • Drive, polarization (EF003355): Polarized
  • Drive, switching attitude (EF003356): Mono stable
  • Number of contacts as normally closed contact (EF008255): 0
  • Number of contacts as normally open contact (EF008256): 0
  • Number of contacts as change-over contact (EF008257): 2
  • Type of switch contact (EF003358): Single contact
  • With forced-guided contacts (EF003357): No
  • Material of contact surface (EF004020): Untreated
  • Nominal current (EF000001): 0.01 A
  • Degree of protection (IP) (EF005474): IP20
  • Width (EF000008): 14 mm

More info

▲

Dimensions

Width14 mm
Height80 mm
Depth94 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN60 V DC
Typical input current at UN10 mA
Typical response time8 ms
Typical release time10 ms
Protective circuitProtection against polarity reversal Polarity protection diode
Free-wheeling diode Damping diode
Operating voltage displayYellow LED
Power dissipation for nominal condition0.6 W

Contact side

Contact type2 PDT
Contact materialAgNi
Maximum switching voltage250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage5 V AC/DC (at 10 mA)
Min. switching current10 mA (At 5 V)
Maximum inrush current15 A (300 ms)
Limiting continuous current6 A
Interrupting rating (ohmic load) max.140 W (at 24 V DC)
85 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
60 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 609472 A (at 24 V, DC13)
0.2 A (at 250 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 250 V, AC15)

General

Operating mode100% operating factor
Degree of protectionRT III (Relay)
Mechanical service life3 x 107cycles
Flammability rating according to UL 94V0
DesignationStandards/regulations
Standards/regulationsIEC 60664
EN 50178
IEC 62103
Rated surge voltage/insulation6 kV (safe isolation: control side / contact side)
Pollution degree2
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Connection data input side

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.