PHOENIX CONTACT PLC-RPT-48DC/21 PLC-RPT- 48DC/21 2900301 PHOENIX CONTACT PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block wit.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PLC-RPT- 48DC/21 2900301 PHOENIX CONTACT PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block wit..

PLC-RPT-48DC/21

2900301

PHOENIX CONTACT

1 Pcs.

PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in technology and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rails, 1 PDT, input voltage: 48 V DC PLC-INTERFACE, consists of a PLC-BPT.../21 base terminal block with Push-in connection and plug-in miniature relay with power contact, for mounting on NS 35/7.5 symmetrical rail, 1 reverse contact, input voltage 48 V DC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact PLC-RPT-48DC/21 is a PLC-INTERFACE terminal block relay built for signal isolation and switching inside industrial control cabinets. Electromechanical interface relays isolate low-voltage control logic from heavier field loads, protecting sensitive controllers while safely managing downstream actuators. Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Complete with socket (EF003359): Yes
  • With detachable clamps (EF003340): No
  • With LED indication (EF005950): Yes
  • Rated control supply voltage DC (EF003980): 37.4 V
  • Voltage type for actuating (EF008242): DC
  • Drive, polarization (EF003355): Polarized
  • Drive, switching attitude (EF003356): Mono stable
  • Number of contacts as normally closed contact (EF008255): 0
  • Number of contacts as normally open contact (EF008256): 0
  • Number of contacts as change-over contact (EF008257): 1
  • Type of switch contact (EF003358): Single contact
  • With forced-guided contacts (EF003357): No
  • Material of contact surface (EF004020): Untreated
  • Nominal current (EF000001): 0.0092 A
  • Degree of protection (IP) (EF005474): IP20
  • Width (EF000008): 6.2 mm

More info

▲

Dimensions

Width6.2 mm
Height80 mm
Depth94 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN48 V DC
Typical input current at UN9.2 mA
Typical response time5 ms
Typical release time8 ms
Protective circuitProtection against polarity reversal Polarity protection diode
Free-wheeling diode Damping diode
Operating voltage displayyes
Power dissipation for nominal condition0.44 W

Contact side

Contact type1 PDT
Contact materialAgSnO
Maximum switching voltage250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage5 V (at 100 mA)
Min. switching current10 mA (at 12 V)
Maximum inrush currenton request
Limiting continuous current6 A
Interrupting rating (ohmic load) max.140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 609472 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.1 A (at 220 V, DC13)
3 A (at 24 V, AC15)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)

General

Test voltage relay winding/relay contact4 kV AC (50 Hz, 1 min.)
Operating mode100% operating factor
Degree of protectionRT III (Relay)
Mechanical service life2 x 107cycles
Flammability rating according to UL 94V0
DesignationStandards/regulations
Standards/regulationsIEC 60664
IEC 60664 A
DIN VDE 0110
DIN EN 50178/DIN VDE 0160 (in relevant parts)
DIN EN 50178/VDE 0160
IEC 60255/DIN VDE 0435 (in relevant parts)
Pollution degree3
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Connection data input side

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.