PHOENIX CONTACT PLC-RPT-48DC/21-21AU PLC-RPT- 48DC/21-21AU 2900340 PHOENIX CONTACT PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal b.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PLC-RPT- 48DC/21-21AU 2900340 PHOENIX CONTACT PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal b..

PLC-RPT-48DC/21-21AU

2900340

PHOENIX CONTACT

10 Pcs.

PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with push-in connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 48 V DC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

A Phoenix Contact PLC-INTERFACE relay assembly integrates a basic terminal block and electromechanical switching elements to bridge control systems with plant actuators and sensors. This modular interface arrangement optimizes space inside control panels while ensuring secure signal conditioning.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Complete with socket (EF003359): Yes
  • With detachable clamps (EF003340): No
  • With LED indication (EF005950): Yes
  • Rated control supply voltage DC (EF003980): 40.3 V
  • Voltage type for actuating (EF008242): DC
  • Drive, polarization (EF003355): Polarized
  • Drive, switching attitude (EF003356): Mono stable
  • Number of contacts as normally closed contact (EF008255): 0
  • Number of contacts as normally open contact (EF008256): 0
  • Number of contacts as change-over contact (EF008257): 2
  • Type of switch contact (EF003358): Single contact
  • With forced-guided contacts (EF003357): No
  • Material of contact surface (EF004020): Gold
  • Nominal current (EF000001): 0.02 A
  • Degree of protection (IP) (EF005474): IP20
  • Width (EF000008): 14 mm

    More info

    ▲

    Dimensions

    Width14 mm
    Height80 mm
    Depth94 mm

    Ambient conditions

    Ambient temperature (operation)-40 °C ... 60 °C
    Ambient temperature (storage/transport)-40 °C ... 85 °C

    Coil side

    Nominal input voltage UN48 V DC
    Typical input current at UN20 mA
    Typical response time8 ms
    Typical release time10 ms
    Protective circuitProtection against polarity reversal Polarity protection diode
    Free-wheeling diode Damping diode
    Operating voltage displayYellow LED
    Power dissipation for nominal condition0.96 W

    Contact side

    Contact type2 PDT
    Contact materialAgNi, hard gold-plated
    Maximum switching voltage30 V AC
    36 V DC
    Minimum switching voltage100 mV (at 10 mA)
    Min. switching current1 mA (at 24 V)
    Maximum inrush current50 mA
    Limiting continuous current50 mA
    Interrupting rating (ohmic load) max.1.2 W (at 24 V DC)
    Notethe following values are applicable if a gold layer is destroyed
    Maximum switching voltage250 V AC/DC
    Minimum switching voltage5 V AC/DC
    Limiting continuous current6 A
    Maximum inrush current15 A (300 ms)
    Min. switching current10 mA
    Interrupting rating (ohmic load) max.140 W (at 24 V DC)
    85 W (at 48 V DC)
    60 W (at 60 V DC)
    44 W (at 110 V DC)
    60 W (at 220 V DC)
    1500 VA (for 250 V AC)
    Switching capacity in acc. with DIN VDE 0660/IEC 609472 A (at 24 V, DC13)
    0.2 A (at 110 V, DC13)
    0.2 A (at 250 V, DC13)
    2 A (at 24 V, AC15)
    2 A (at 120 V, AC15)
    2 A (at 250 V, AC15)

    General

    Operating mode100% operating factor
    Degree of protectionRT III (Relay)
    Mechanical service life3 x 107cycles
    Flammability rating according to UL 94V0
    DesignationStandards/regulations
    Standards/regulationsIEC 60664
    EN 50178
    IEC 62103
    Rated surge voltage/insulation6 kV/Basic isolation
    Pollution degree2
    Overvoltage categoryIII
    Mounting positionany
    Assembly instructionsIn rows with zero spacing

    Connection data input side

    Connection nameCoil side
    Connection methodPush-in connection
    Stripping length8 mm
    Conductor cross section solid0.14 mm² ... 2.5 mm²
    Conductor cross section flexible0.14 mm² ... 2.5 mm²
    Conductor cross section AWG26 ... 14

    Product Datasheet

    Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.