PHOENIX CONTACT PLC-RPT-120UC/21-21AU PLC-RPT-120UC/21-21AU 2900342 PHOENIX CONTACT PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal b.. View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PLC-RPT-120UC/21-21AU 2900342 PHOENIX CONTACT PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal b..

PLC-RPT-120UC/21-21AU

2900342

PHOENIX CONTACT

10 Pcs.

PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with push-in connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 120 V AC/DC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact PLC-RPT-120UC/21-21AU is a PLC-INTERFACE terminal block relay designed for electrical isolation, signal amplification, and voltage matching in control cabinets and automation systems. Relay modules interface low-voltage controllers with higher-voltage field devices safely and effectively.

Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Width: 14 mm
  • Height: 80 mm
  • Depth: 94 mm
  • Ambient temperature (operation): -40 °C ... 60 °C
  • Ambient temperature (storage/transport): -40 °C ... 85 °C
  • Nominal input voltage U N: 120 V AC (110 V DC)
  • Typical input current at U N: 4.2 mA (at 110 V DC)
  • Typical response time: 7 ms
  • Typical release time: 10 ms
  • Protective circuit: Bridge rectifier Bridge rectifier
  • Operating voltage display: Yellow LED
  • Power dissipation for nominal condition: 0.54 W
  • Contact type: 2 PDT
  • Contact material: AgNi, hard gold-plated
  • Maximum switching voltage: 30 V AC
  • Minimum switching voltage: 100 mV (at 10 mA)

More info

▲

Dimensions

Width14 mm
Height80 mm
Depth94 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN120 V AC (110 V DC)
110 V DC
Typical input current at UN4.2 mA (at 110 V DC)
4.5 mA (for 120 V AC)
Typical response time7 ms
Typical release time10 ms
Protective circuitBridge rectifier Bridge rectifier
Operating voltage displayYellow LED
Power dissipation for nominal condition0.54 W

Contact side

Contact type2 PDT
Contact materialAgNi, hard gold-plated
Maximum switching voltage30 V AC
36 V DC
Minimum switching voltage100 mV (at 10 mA)
Min. switching current1 mA (at 24 V)
Maximum inrush current50 mA
Limiting continuous current50 mA
Interrupting rating (ohmic load) max.1.2 W (at 24 V DC)
Notethe following values are applicable if a gold layer is destroyed
Maximum switching voltage250 V AC/DC
Minimum switching voltage5 V AC/DC
Limiting continuous current6 A
Maximum inrush current15 A (300 ms)
Min. switching current10 mA
Interrupting rating (ohmic load) max.140 W (at 24 V DC)
85 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
60 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 609472 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
2 A (at 24 V, AC15)
2 A (at 120 V, AC15)
2 A (at 250 V, AC15)

General

Operating mode100% operating factor
Degree of protectionRT III (Relay)
Mechanical service life3 x 107cycles
Flammability rating according to UL 94V0
DesignationStandards/regulations
Standards/regulationsIEC 60664
EN 50178
IEC 62103
Rated surge voltage/insulation6 kV/Basic isolation
Pollution degree2
Overvoltage categoryIII
Mounting positionany
Assembly instructionsIn rows with zero spacing

Connection data input side

Connection nameCoil side
Connection methodPush-in connection
Stripping length8 mm
Conductor cross section solid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.