View larger
PT 2,5/12-5,0-H 1935873 PHOENIX CONTACT Screw compact terminal block
PT 2,5/12-5,0-H
1935873
PHOENIX CONTACT
50 Pcs.
Connectors > Printed circuit board terminal
PCB Connectors (PCC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Phoenix Contact PT 2,5/12-5,0-H screw compact terminal block provides reliable conductor termination with a low-profile design suited for modern industrial electronics. It ensures robust mechanical and electrical connections on PCBs.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Orderkey: 1935873
- Packing unit: 50 pc
- Note: Made to Order (non-returnable)
- Catalog page: Page 427 (C-1-2013)
- GTIN: 4017918948498
- Weight per Piece (excluding packing): 14.530 g
- Custom tariff number: 85369010
- Country of origin: PL (Poland)
- Length [ l ]: 9 mm
- Pitch: 5 mm
- Dimension a: 55 mm
- Width [ w ]: 60 mm
- Height: 13.5 mm
- Height [ h ]: 17.6 mm
- Solder pin [P]: 4.1 mm
- Pin spacing: 5 mm
More info
▲Key Commercial Data
| Orderkey | 1935873 |
|---|---|
| Packing unit | 50 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 427 (C-1-2013) |
| GTIN | 4017918948498 |
| Weight per Piece (excluding packing) | 14.530 g |
| Custom tariff number | 85369010 |
| Country of origin | PL (Poland) |
Dimensions
| Length [ l ] | 9 mm |
|---|---|
| Pitch | 5 mm |
| Dimension a | 55 mm |
| Width [ w ] | 60 mm |
| Height | 13.5 mm |
| Height [ h ] | 17.6 mm |
| Solder pin [P] | 4.1 mm |
| Pin spacing | 5 mm |
| Hole diameter | 1.3 mm |
General
| Range of articles | PT 2,5/..-H |
|---|---|
| Insulating material group | I |
| Rated surge voltage (III/3) | 4 kV |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (II/2) | 4 kV |
| Rated voltage (III/3) | 250 V |
| Rated voltage (III/2) | 400 V |
| Rated voltage (II/2) | 630 V |
| Connection in acc. with standard | EN-VDE |
| Nominal current IN | 32 A |
| Nominal cross section | 2.5 mm² |
| Maximum load current | 32 A (current values dependent on no. of pos., dimensioning of printed circuits, and ambient temperature) |
| Insulating material | PA |
| Solder pin surface | |
| Flammability rating according to UL 94 | V0 |
| Internal cylindrical gage | A3 / B3 |
| Stripping length | 6.5 mm |
| Number of positions | 12 |
| Screw thread | M3 |
| Tightening torque, min | 0.45 Nm |
| Tightening torque max | 0.5 Nm |
Connection data
| Conductor cross section solid min. | 0.5 mm² |
|---|---|
| Conductor cross section solid max. | 4 mm² |
| Conductor cross section flexible min. | 0.5 mm² |
| Conductor cross section flexible max. | 4 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve min. | 0.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve max. | 2.5 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve min. | 0.5 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve max. | 2.5 mm² |
| Conductor cross section AWG min. | 20 |
| Conductor cross section AWG max. | 10 |
| 2 conductors with same cross section, solid min. | 0.5 mm² |
| 2 conductors with same cross section, solid max. | 1.5 mm² |
| 2 conductors with same cross section, stranded min. | 0.5 mm² |
| 2 conductors with same cross section, stranded max. | 1.5 mm² |
| 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. | 0.5 mm² |
| 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. | 0.75 mm² The technical data regarding clamping with ferrules applies only when using crimping pliers ZA 3. When using ferrules, it is necessary to take into account possible restrictions regarding nominal voltage. |
| 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. | 0.5 mm² |
| 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. | 1.5 mm² The technical data regarding clamping with ferrules applies only when using crimping pliers ZA 3. When using ferrules, it is necessary to take into account possible restrictions regarding nominal voltage. |
Standards and Regulations
| Connection in acc. with standard | EN-VDE |
|---|---|
| CUL | |
| Flammability rating according to UL 94 | V0 |
Environmental Product Compliance
| China RoHS | Environmentally Friendly Use Period = 50 |
|---|---|
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |