View larger
FRONT 2,5-H/SA 5/11 1701382 PHOENIX CONTACT PCB terminal block
FRONT 2,5-H/SA 5/11
1701382
PHOENIX CONTACT
20 Pcs.
Connectors > Printed circuit board terminal
PCB Connectors (PCC)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Serving as a dependable interface for printed circuit boards, this Phoenix Contact terminal block (part number FRONT 2,5-H/SA 5/11 1701382) ensures safe transmission of signals and operating currents. Terminal blocks of this category are commonly chosen for custom electronic assemblies where secure and maintenance-free wire attachment is required.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Orderkey: 1701382
- Packing unit: 20 pc
- Note: Made to Order (non-returnable)
- Catalog page: Page 114 (C-1-2013)
- GTIN: 4017918329723
- Weight per Piece (excluding packing): 39.080 g
- Custom tariff number: 85369010
- Country of origin: DE (Germany)
- Length [ l ]: 19.5 mm
- Pitch: 5 mm
- Dimension a: 50 mm
- Width [ w ]: 57.5 mm
- Height: 18.5 mm
- Height [ h ]: 22.1 mm
- Solder pin [P]: 4.3 mm
- Pin spacing: 5 mm
More info
▲Key Commercial Data
| Orderkey | 1701382 |
|---|---|
| Packing unit | 20 pc |
| Note | Made to Order (non-returnable) |
| Catalog page | Page 114 (C-1-2013) |
| GTIN | 4017918329723 |
| Weight per Piece (excluding packing) | 39.080 g |
| Custom tariff number | 85369010 |
| Country of origin | DE (Germany) |
Dimensions
| Length [ l ] | 19.5 mm |
|---|---|
| Pitch | 5 mm |
| Dimension a | 50 mm |
| Width [ w ] | 57.5 mm |
| Height | 18.5 mm |
| Height [ h ] | 22.1 mm |
| Solder pin [P] | 4.3 mm |
| Pin spacing | 5 mm |
| Hole diameter | 1.2 mm |
General
| Range of articles | FRONT 2,5-H/SA 5 |
|---|---|
| Insulating material group | I |
| Rated surge voltage (III/3) | 4 kV |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (II/2) | 4 kV |
| Rated voltage (III/3) | 250 V |
| Rated voltage (III/2) | 400 V |
| Rated voltage (II/2) | 630 V |
| Connection in acc. with standard | EN-VDE |
| Nominal current IN | 24 A |
| Nominal cross section | 2.5 mm² |
| Maximum load current | 17.5 A (with a 2.5 mm² conductor cross section) |
| Insulating material | PA |
| Solder pin surface | |
| Flammability rating according to UL 94 | V0 |
| Internal cylindrical gage | A3 |
| Stripping length | 9 mm |
| Number of positions | 11 |
| Screw thread | M2,5 |
| Tightening torque, min | 0.4 Nm |
| Tightening torque max | 0.5 Nm |
Connection data
| Conductor cross section solid min. | 0.2 mm² |
|---|---|
| Conductor cross section solid max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve min. | 0.25 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve max. | 1.5 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve min. | 0.25 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve max. | 1.5 mm² |
| Conductor cross section AWG min. | 24 |
| Conductor cross section AWG max. | 14 |
| 2 conductors with same cross section, solid min. | 0.2 mm² |
| 2 conductors with same cross section, solid max. | 0.75 mm² |
| 2 conductors with same cross section, stranded min. | 0.2 mm² |
| 2 conductors with same cross section, stranded max. | 0.75 mm² |
| 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. | 0.25 mm² |
| 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. | 0.34 mm² |
Standards and Regulations
| Connection in acc. with standard | EN-VDE |
|---|---|
| CSA | |
| Flammability rating according to UL 94 | V0 |
Environmental Product Compliance
| China RoHS | Environmentally friendly use period: unlimited = EFUP-e |
|---|---|
| No hazardous substances above threshold values |