View larger
UMK-5REL/KSR-24/230/KRK5S/MSTB 2908666 PHOENIX CONTACT Relay Module
UMK-5REL/KSR-24/230/KRK5S/MSTB
2908666
PHOENIX CONTACT
50 Pcs.
Automation > Relay socket
Industrial Relays
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
An UMK-5REL/KSR-24/230/KRK5S/MSTB 2908666 PHOENIX CONTACT Relay Module combines pre-assembled switching relays and terminal socket housing into a single modular unit for electrical panel integration. Relay modules isolate control circuits from high-power loads, protecting sensitive PLCs and instrumentation from power surges in industrial systems.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
- Product type: Relay socket
- Mechanical service life: 3x 10 7 cycles
- Data management status Article revision: 04
- Overvoltage category: III
- Pollution degree: 2
- Overvoltage category: III
- Pollution degree: 2
- Rated surge voltage: 6 kV (1.2/50 μs)
- Rated surge voltage: 4 kV (1.2/50 μs)
- Nominal input voltage U N: 24 V DC
- Input voltage range in reference to U N: 0.9 ... 1.1
- Input voltage range: 21.6 V DC ... 26.4 V DC
- Switching Contact switching type: Single contact, 1 changeover contact
- Contact material: AgNi
- Maximum switching voltage: 250 V AC/DC
More info
▲| Utilization restriction | |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Product type | Relay socket |
| Mechanical service life | 3x 107cycles |
| Data management status | |
| Article revision | 04 |
| Insulation characteristics: Air clearances and creepage distances, input/output | |
| Insulation | Reinforced insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
| Insulation characteristics: Air clearances and creepage distances, output K10-K13 | |
| Insulation | Basic insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
| Air clearances and creepage distances, input/output | |
| Rated insulation voltage | 260 V |
| Rated surge voltage | 6 kV (1.2/50 μs) |
| Air clearances and creepage distances, output K10-K13 | |
| Rated insulation voltage | 260 V |
| Rated surge voltage | 4 kV (1.2/50 μs) |
| Nominal input voltage UN | 24 V DC |
| Input voltage range in reference to UN | 0.9 ... 1.1 |
| Input voltage range | 21.6 V DC ... 26.4 V DC |
| Switching | |
| Contact switching type | Single contact, 1 changeover contact |
| Contact material | AgNi |
| Maximum switching voltage | 250 V AC/DC |
| Limiting continuous current | 6 A (Limited by the width of the conductive paths in the output) |
| Minimum switching capacity | 3000 VA |
| Input | |
| Connection method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Output | |
| Connection method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 2 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Width | 78.5 mm |
| Height | 90 mm |
| Depth | 64 mm |
| Ambient conditions | |
| Degree of protection | IP00 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient temperature (operation) | -20 °C ... 50 °C |
| Altitude | ≤ 2000 m |
| Air clearances and creepage distances, input/output | |
| Standards/regulations | DIN EN 50178: 1998-04 |
| Air clearances and creepage distances, output K10-K13 | |
| Standards/regulations | DIN EN 50178: 1998-04 |
| Mounting type | DIN rail mounting |
| Mounting position | any |