PHOENIX CONTACT PACT RCP-D95 PACT RCP-D95 2904890 PHOENIX CONTACT Coil View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PACT RCP-D95 2904890 PHOENIX CONTACT Coil

PACT RCP-D95

2904890

PHOENIX CONTACT

1 Pcs.

Coil Rogowski coil with a length of 300 mm. The diameter of the measuring coil in installed state is 95 mm. The Rogowski coil is used for the measurement of AC current from busbars and high-voltage lines.

Automation > Accessories/spare parts for low-voltage switch technology
INTERFACE Components (IF)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact part PACT RCP-D95 is a specialized coil used for contactless current measurement and monitoring in power distribution systems. Rogowski coils enable flexible retrofitting around existing busbars and cables for electrical metering and protection applications. Pricing, availability and lead time are confirmed per enquiry through an RFQ.

  • Orderkey: 2904890
  • Packing unit: 1 pc
  • Note: Made to Order (non-returnable)
  • GTIN: 4046356898171
  • Weight per Piece (excluding packing): 152.800 g
  • Custom tariff number: 90309000
  • Country of origin: IT (Italy)
  • Frequency measuring range: 40 Hz ... 20000 Hz
  • Position error: < 1 %
  • Linearity error: 0.1 %
  • Output signal (at 50 Hz): 100 mV (no load, at 1,000 A)
  • Output voltage (in no-load operation): V OUT = M * dI/dt
  • Output voltage (sinusoidal, in no-load operation): 100 mV (V OUT = 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz; I = 1,000 A))
  • Length of measuring coil: 300 mm
  • Diameter of measuring coil: 8.3 mm ±0.2 mm
  • Length of signal cable: 3000 mm

More info

▲

Key Commercial Data

Orderkey2904890
Packing unit1 pc
NoteMade to Order (non-returnable)
GTIN4046356898171
Weight per Piece (excluding packing)152.800 g
Custom tariff number90309000
Country of originIT (Italy)

Measuring coil input data

Frequency measuring range40 Hz ... 20000 Hz
Position error< 1 %
Linearity error0.1 %

Measuring coil signal output

Output signal (at 50 Hz)100 mV (no load, at 1,000 A)
Output voltage (in no-load operation)VOUT= M * dI/dt
Output voltage (sinusoidal, in no-load operation)100 mV (VOUT= 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz; I = 1,000 A))

General data, measuring coil

Length of measuring coil300 mm
Diameter of measuring coil8.3 mm ±0.2 mm
Length of signal cable3000 mm
Conductor structure signal line2x 0.22 mm (Signal (tinned))
1x 0.22 mm (Shielding (tinned))
Coil materialElastollan
Housing materialPC
Insulationdouble insulation
Rated insulation voltage1000 V AC (rms CAT III)
600 V AC (rms CAT IV)
Test voltage10.45 kV (DC / 1 min.)
Basic accuracy
UL, USA/CanadaUL 61010 Recognized

General data

Standards/regulationsIEC 61010-1
IEC 61010-2-032

Ambient conditions

Ambient temperature (operation)-30 °C ... 80 °C (Measuring coil)
Ambient temperature (storage/transport)-40 °C ... 80 °C (Measuring coil)
Maximum altitude< 2000 m
Measuring coil degree of protectionIP67 (not assessed by UL)

Standards and Regulations

Standards/regulationsIEC 61010-1
IEC 61010-2-032
UL, USA/CanadaUL 61010 Recognized

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

Classifications


Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.