PHOENIX CONTACT REL-MR-120AC/21-21/MS REL-MR-120AC/21-21/MS 2987969 PHOENIX CONTACT Single relay View larger
Images are for illustrative purposes only. Please refer to data sheet for details

REL-MR-120AC/21-21/MS 2987969 PHOENIX CONTACT Single relay

REL-MR-120AC/21-21/MS

2987969

PHOENIX CONTACT

1 Pcs.

Single relay Plug-in miniature relay, with power contact, 2 switched contacts, check button, mechanical switching position indication, status LED, coil voltage 120 V AC

Automation > Switching relay
Industrial Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.

Request Quote

Product Overview

Phoenix Contact REL-MR-120AC/21-21/MS is a miniature single relay designed for efficient signal isolation in industrial automation networks. Electromechanical relays allow low-power control electronics to govern heavier electrical loads reliably.

Specific pricing, availability, and lead time are confirmed per enquiry through an RFQ.

  • Complete with socket (EF003359): No
  • With detachable clamps (EF003340): No
  • With LED indication (EF005950): No
  • Rated control supply voltage AC 50 Hz (EF003978): 93.6 V
  • Rated control supply voltage AC 60 Hz (EF003979): 93.6 V
  • Voltage type for actuating (EF008242): AC
  • Drive, polarization (EF003355): Polarity free
  • Drive, switching attitude (EF003356): Mono stable
  • Number of contacts as normally closed contact (EF008255): 0
  • Number of contacts as normally open contact (EF008256): 0
  • Number of contacts as change-over contact (EF008257): 2
  • Type of switch contact (EF003358): Single contact
  • With forced-guided contacts (EF003357): No
  • Material of contact surface (EF004020): Untreated
  • Nominal current (EF000001): 0.007 A
  • Width (EF000008): 12.7 mm

More info

▲

Key Commercial Data

Orderkey2987969
Packing unit10 pc
Minimum order quantity10 pc
Catalog pagePage 306 (C-5-2017)
GTIN4046356480970
Weight per Piece (excluding packing)17.480 g
Custom tariff number85364190
Country of originCN (China)

Dimensions

Width12.7 mm
Height29 mm
Depth25 mm

Ambient conditions

Ambient temperature (operation)-40 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Coil side

Nominal input voltage UN120 V AC
Mains frequency50/60 Hz
Typical input current at UN7 mA
Typical response time3 ms ... 12 ms (depending on phase relation)
Typical release time range2 ms ... 8 ms (depending on phase relation)
Power dissipation for nominal condition0.84 W

Contact side

Contact type2 PDT
Type of switch contactSingle contact
Contact materialAgNi
Maximum switching voltage250 V AC/DC
Minimum switching voltage12 V (at 10 mA)
Min. switching current10 mA (at 12 V)
Maximum inrush current16 A (20 ms)
Limiting continuous current8 A
Interrupting rating (ohmic load) max.2000 VA (for 250 V AC)
Switching capacity1 A (at 24 V, DC13)
1.5 A (at 24 V, AC15)
1.5 A (at 120 V, AC15)
1.5 A (at 240 V, AC15)
Motor load according to UL 5081/4 HP, 120 V AC (N/O contact)
1/2 HP, 240 V AC (N/O contact)
1/4 HP, 120 V AC (N/C contact)
1/3 HP, 240 V AC (N/C contact)

General

Test voltage relay winding/relay contact5 kV AC (50 Hz, 1 min.)
Test voltage relay contact/relay contact2.5 kV AC (50 Hz, 1 min.)
Mechanical service life5x 106cycles
Service life, electricalsee diagram
Net weight (SAP)17.48 g

Standards and Regulations

Connection in acc. with standardCUL
Standards/regulationsEN 61810-1
VDE 0435-201
EN 50178

Environmental Product Compliance

China RoHSEnvironmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values

Classifications


Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.