View larger
MH-B24-17-MULTI-66-PA-LG 1299363 PHOENIX CONTACT Plates for cable passage, outer diameter of the cable: 4x 3..
MH-B24-17-MULTI-66-PA-LG
1299363
PHOENIX CONTACT
1 Pcs.
Automation > Gland plate for small distribution boards/switchgear cabinets
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The MH-B24-17-MULTI-66-PA-LG 1299363 Phoenix Contact plates for cable passage, outer diameter of the cable: 4x 3.. organizes pre-terminated or standard multiconductor cables through enclosure walls while maintaining stringent environmental sealing. Cable passage frame plates allow multiple lines to pass through a single cutout efficiently without sacrificing protection ratings.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: incl. mounting screws
- Product type: Frame for cable sleeves
- Tightening torque: 1.8 Nm
- Width: 56 mm
- Height: 19 mm
- Length: 154 mm
- Material: TPE-SEBS
- Flammability rating according to UL 94: V0
- External cable diameter (): 4x 3 mm ... 7 mm
- Ambient conditions Degree of protection: IP66
- Ambient temperature (operation): -40 °C ... 90 °C
- Assembly instructions: M4 mounting screw, torque: 1.8 Nm, SW5 Allen key
- Width (EF000008): 56 mm
- Pre-stamping (EF001039): No
More info
▲| General | incl. mounting screws |
| Product type | Frame for cable sleeves |
| Tightening torque | 1.8 Nm |
| Width | 56 mm |
| Height | 19 mm |
| Length | 154 mm |
| Material | TPE-SEBS |
| Flammability rating according to UL 94 | V0 |
| External cable diameter () | 4x 3 mm ... 7 mm |
| 12x 7 mm ... 20 mm | |
| 1x 10 mm ... 20 mm |
| Ambient conditions | |
| Degree of protection | IP66 |
| Ambient temperature (operation) | -40 °C ... 90 °C |
| Assembly instructions | M4 mounting screw, torque: 1.8 Nm, SW5 Allen key |
| The mounting screws included should be used for assembly. Assembly steps: 1) Fix Multigates with the mounting screws provided (observe torque) 2) Make a hole in the membrane (with a screwdriver) or cut off the tip of the cone 3) Guide the cable through the opening (from the outside). Withdraw the cable approximately 20 mm (to improve strain relief). |