View larger
MH-B16-17-MULTI-66-PA-LG 1299341 PHOENIX CONTACT Plates for cable passage, outer diameter of the cable: 12x ..
MH-B16-17-MULTI-66-PA-LG
1299341
PHOENIX CONTACT
1 Pcs.
Automation > Gland plate for small distribution boards/switchgear cabinets
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Plates for cable passage like the MH-B16-17-MULTI-66-PA-LG 1299341 Phoenix Contact plates for cable passage, outer diameter of the cable: 12x provide an organized routing interface for multiple conductors entering an electrical panel. These multi-cable passage frames ensure proper strain relief and environmental sealing around incoming wiring harnesses. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: incl. mounting screws
- Product type: Frame for cable sleeves
- Tightening torque: 1.8 Nm
- Width: 56 mm
- Height: 19 mm
- Length: 127 mm
- Material: TPE-SEBS
- Flammability rating according to UL 94: V0
- External cable diameter (): 12x 3 mm ... 7 mm
- Ambient conditions Degree of protection: IP66
- Ambient temperature (operation): -40 °C ... 90 °C
- Assembly instructions: M4 mounting screw, torque: 1.8 Nm, SW5 Allen key
- Width (EF000008): 56 mm
- Pre-stamping (EF001039): No
More info
▲| General | incl. mounting screws |
| Product type | Frame for cable sleeves |
| Tightening torque | 1.8 Nm |
| Dimensional drawing | |
| Width | 56 mm |
| Height | 19 mm |
| Length | 127 mm |
| Material | TPE-SEBS |
| Flammability rating according to UL 94 | V0 |
| External cable diameter () | 12x 3 mm ... 7 mm |
| 5x 7 mm ... 13 mm |
| Ambient conditions | |
| Degree of protection | IP66 |
| Ambient temperature (operation) | -40 °C ... 90 °C |
| Assembly instructions | M4 mounting screw, torque: 1.8 Nm, SW5 Allen key |
| The mounting screws included should be used for assembly. Assembly steps: 1) Fix Multigates with the mounting screws provided (observe torque) 2) Make a hole in the membrane (with a screwdriver) or cut off the tip of the cone 3) Guide the cable through the opening (from the outside). Withdraw the cable approximately 20 mm (to improve strain relief). |