View larger
MH-B10-12-MULTI-66-PA-LG 1299362 PHOENIX CONTACT Plates for cable passage, outer diameter of the cable: 5x 3..
MH-B10-12-MULTI-66-PA-LG
1299362
PHOENIX CONTACT
1 Pcs.
Automation > Gland plate for small distribution boards/switchgear cabinets
Industrial plug-in connectors/interfaces
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Functioning as a Phoenix Contact MH-B10-12-MULTI-66-PA-LG plates for cable passage, outer diameter of the cable: 5x 3.., this membrane-based frame enables high-density multi-cable feed-throughs with high ingress protection. Cable grommet frames are standard components in machine building for routing pre-terminated cables safely through enclosure walls. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- General: incl. fixing screws
- Product Type: Cable grommet frame
- Tightening torque: 1.8 Nm
- Width: 56 mm
- Height: 19 mm
- Longitude: 107 mm
- Material: TPE-SEBS
- Flammability class according to UL 94: V0
- Cable Outer Diameter (): 5x 3 mm ... 7 mm
- Environmental conditions Protection Index: IP66
- Ambient Temperature (Service): -40 °C ... 90 °C
- Installation instructions: Set screw M4, torque: 1.8 Nm, inner hexagon wrench width 5
- Width (EF000008): 56 mm
- Pre-stamping (EF001039): No
More info
▲| General | incl. fixing screws |
| Product Type | Cable grommet frame |
| Tightening torque | 1.8 Nm |
| Width | 56 mm |
| Height | 19 mm |
| Longitude | 107 mm |
| Material | TPE-SEBS |
| Flammability class according to UL 94 | V0 |
| Cable Outer Diameter () | 5x 3 mm ... 7 mm |
| 4x 5 mm ... 10 mm | |
| 2x 7 mm ... 13 mm | |
| 1x 9 mm ... 16 mm |
| Environmental conditions | |
| Protection Index | IP66 |
| Ambient Temperature (Service) | -40 °C ... 90 °C |
| Installation instructions | Set screw M4, torque: 1.8 Nm, inner hexagon wrench width 5 |
| The fixing screws included in the packaging must be used for assembly. Assembly sequence: 1) Fix the Multigates with the attached set screws (note the pair) 2) Tap the hole in the membrane (with a screwdriver) or cut off the tip of the cone 3) Guide the wire (from the outside) through the hole. Remove the cable about 20 mm (to improve traction compensation) |