View larger
MACX MCR-EX-SL-UI-REL 2906164 PHOENIX CONTACT Limit value switch with Ex i input for active current and volt..
MACX MCR-EX-SL-UI-REL
2906164
PHOENIX CONTACT
1 Pcs.
Automation > Isolation amplifier
INTERFACE Components (IF)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Configured for monitoring critical limits, the Phoenix Contact MACX MCR-EX-SL-UI-REL limit value switch with Ex i input processes active current and voltage inputs in demanding plant installations. Such devices trigger protective switching actions when process variables cross pre-set thresholds.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Rated supply voltage DC (EF007078): 9.6 V
- Number of input ranges -60 mV ... +60 mV (EF006927): 0
- Number of input ranges -100 mV ... +100 mV (EF006912): 0
- Number of input ranges -300 mV ... +300 mV (EF006920): 0
- Number of input ranges -500 mV ... +500 mV (EF006926): 0
- Number of input ranges -1 V ... +1 V (EF006906): 0
- Number of input ranges -2 V ... +2 V (EF006913): 0
- Number of input ranges -2.5 V ... +2.5 V (EF006915): 0
- Number of input ranges -5 V ... +5 V (EF006923): 0
- Number of input ranges -10 V ... +10 V (EF006909): 0
- Number of input ranges -20 V ... +20 V (EF006917): 0
- Number of input ranges 0 mV ... 60 mV (EF006905): 0
- Number of input ranges 0 mV ... 100 mV (EF006893): 0
- Number of input ranges 0 mV ... 200 mV (EF006898): 0
- Number of input ranges 0 mV ... 300 mV (EF006901): 0
- Number of input ranges 0 mV ... 500 mV (EF006904): 0
More info
▲Key Commercial Data
| Orderkey | 2906164 |
|---|---|
| Packing unit | 1 |
| Catalog page | Page 168 (C-5-2019) |
| GTIN | 4055626043173 |
| Custom tariff number | 85437090 |
Ambient conditions
| Ambient temperature (operation) | -20 °C ... 65 °C (Any mounting position) |
|---|---|
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | ≤ 2000 m |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Degree of protection | IP20 |
| Noise immunity | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
Input data
| Signal input | Intrinsically safe |
|---|---|
| Voltage input signal | 0.1 V ... 10 V |
| Current input signal | 0.2 mA ... 20 mA |
| 0.18 mA ... 21 mA (Maximum range) | |
| Input resistance of voltage input | > 100 kΩ |
| Input resistance current input | < 28 Ω |
| Switching hysteresis | off: approx. 0.5 %, on: approx. 1 % |
| Line fault detection | Break U |
| Short circuit U > 10.8 V, I > 21.1 mA |
Output data
| Output name | Relay output |
|---|---|
| Contact type | 1 PDT |
| Contact material | AgSnO2, hard gold-plated |
| Max. switching current | ≤ 4 A AC (cos phi = 1) |
| ≤ 1 A DC (ohmic load, 24 V DC, 50 mW) | |
| ≤ 0.2 A DC (ohmic load, 120 V DC) | |
| Mechanical service life | ≤ 107cycles |
Power supply
| Nominal supply voltage | 24 V DC |
|---|---|
| Supply voltage range | 9.6 V DC ... 30 V DC (12 V DC ... 24 V DC (-20 % ... +25 %)) |
| Typical current consumption | 38 mA (24 V DC) |
| Max. current consumption | 90 mA (10 V DC) |
| Power dissipation | < 0.9 W |
| Power consumption | ≤ 1.2 W |
Connection data
| Connection method | Screw connection |
|---|---|
| Stripping length | 7 mm |
| Screw thread | M3 |
| Conductor cross section solid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Torque | 0.5 Nm ... 0.6 Nm |
General
| Maximum transmission error | 0.1 % |
|---|---|
| Maximum temperature coefficient | 0.01 %/K |
| Step response (0–99%) | ≤ 22 ms |
| Status display | Green LED (supply voltage, PWR) |
| Red LED, flashing (line, sensor error, ERR) | |
| Yellow LED (switching output) | |
| Degree of pollution | 2 |
| Overvoltage category | II |
| Electromagnetic compatibility | Conformance with EMC directive |
| Interference emission | EN 61000-6-4 |
| Housing material | PA 6.6-FR |
| Designation | Input/output |
| Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
| Designation | Input/output/supply, DIN rail connector |
| Electrical isolation | 300 Vrms(Rated insulation voltage (overvoltage category II; degree of pollution 2, safe isolation as per EN 61010-1)) |
| 2.5 kV (50 Hz, 1 min., test voltage) | |
| Designation | Input/supply, DIN rail connector |
| Electrical isolation | 375 V (Peak value in accordance with EN 60079-11) |
Safety data
| Input voltage Ui | 30 V (Current and voltage input) |
|---|---|
| Input current Ii | 120 mA (Current and voltage input) |
| Input power Pi | 900 mW (Current and voltage input) |
| Max. internal inductance Li | negligible |
| Max. internal capacitance Ci | 75 nF (for current input) |
| Max. output voltage Uo | 0 V DC (Current input) |
| Max. output current Io | 0 mA (Current input) |
| Max. output power Po | 0 mW (Current input) |
| Group | IIC |
| Max. external inductivity Lo | 100 mH |
| Max. external capacitance Co | 3.3 µF |
| Group | IIC |
| Max. external inductivity Lo | 5 mH |
| Max. external capacitance Co | 4.7 µF |
| Group | IIC |
| Max. external inductivity Lo | 1 mH |
| Max. external capacitance Co | 6.3 µF |
| Group | IIB/IIIC |
| Max. external inductivity Lo | 100 mH |
| Max. external capacitance Co | 16 µF |
| Group | IIB/IIIC |
| Max. external inductivity Lo | 5 mH |
| Max. external capacitance Co | 24 µF |
| Group | IIB/IIIC |
| Max. external inductivity Lo | 1 mH |
| Max. external capacitance Co | 35 µF |
| Safety-related maximum voltage Um | 253 V AC |
Standards and Regulations
| Electromagnetic compatibility | Conformance with EMC directive |
|---|---|
| Noise emission | EN 61000-6-4 |
| Group | IIC |
| IIC | |
| IIC | |
| IIB/IIIC | |
| IIB/IIIC | |
| IIB/IIIC |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| China RoHS | Environmentally Friendly Use Period = 50 |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
eCl@ss
| eCl@ss 4.0 | 27210100 |
|---|---|
| eCl@ss 4.1 | 27210100 |
| eCl@ss 5.0 | 27210100 |
| eCl@ss 5.1 | 27210100 |
| eCl@ss 6.0 | 27210100 |
| eCl@ss 7.0 | 27210120 |
| eCl@ss 8.0 | 27210120 |
| eCl@ss 9.0 | 27210120 |